Pitot Tubes for Differential Pressure Sensors
Differential pressure and Pitot Tube Measurement Measuring Connector
For Differential Pressure Sensors FDA602
- Prandtl Pitot tubes with hemispheric head.
- For measuring the dynamic pressure, the tip of the Pitot tube has an opening of 0.3d.
- For measuring the static pressure, a total of 12 holes with 0.1d Ø have been arranged at a distance of 3d.
ALMEMO® devices that have an option for entering factors can also be used to perform wind velocity measurements with cylindrical probes, according to VDEH. The cylindrical Pitot tubes have a probe-related coefficient of 1.7. By entering a factor of 0.767 in the range m/s this coefficient will be considered during the measurement.
|TYPES AND TECHNICAL DATA|
|Head (d)||Shaft (D)||Length||Tmax||Dust||Material||Order No.|
|Moveable Screw Connection|
|For brass Pitot tubes with shaft diameter x (6; 8; 10; 20mm)||Order no. ZB9912KMx|
|For steel Pitot tubes with shaft diameter x (6; 8; 10; 20mm)||Order no. ZB9912KVx|
* These VA Pitot tubes can be operated upt to 700°C for short periods.