No products in the cart.
Technical features
- Thermal comfort and air-conditioning calculations using WinControl software with add-on module for comfort index measurement as per DIN ISO 7730 and DIN EN 13779 (formerly DIN 1946)
- Independent measuring sequence in real-time mode
- Various display and output options Real-time mode, memory access to offline measuring operations
- Graphical presentation of measured data and calculated data in a format with data export options
- Comprehensive, clear, meaningful evaluation.
Operative range
It is possible with this measuring setup to measure all the physical parameters needed for assessing and evaluating thermal comfort simultaneously on three levels. It reliably evaluates the performance of heating and ventilating systems. The data acquired from the series of measuring operations for operative temperature (globe temperature), room temperature, and room air flow and humidity, and the necessary input parameters (e.g. clothing factor, activity level, mechanical output) is used together to calculate the PMV (predicted mean vote) and PPD (predicted percent dissatisfied) values (as per DIN ISO 7730) and the degree of turbulence ( as per DIN EN 13779, formerly DIN 1946 Part 2); these values are calculated either online or offline using the AMR WinControl software in conjunction with the add-on module for comfort index measurement.
Software
The averaging number is preset at 200 measuring points but this is variable and can be modified. The PMV and PPD values and the degree of turbulence can be displayed and documented in y/t or x/y diagrams either each one separately or together with other measurable variables. A software wizard is available to guide the user step-by-step through the various settings. If measuring is started online, the first value is indicated after completion of the first 200 measuring operations (as per DIN ISO 7730). These values continue to be calculated, updated, and displayed, and – optionally – also saved and / or exported.
| Types (Sensor Set for one level) | Order No. | |
|---|---|---|
| Globe Thermometer | FPA805GTS | |
| Humidity / Temperature Sensor | FHAD4C41 | |
| Digital Thermoanemometer Onimdirectional sensor, upto 1000 m/s | FVAD05TOK300 | |
| Stand for measuring operations at heights of 0.1 to 1.7 meters, including 1 set of instrument holders for 1 level (tranverse including transverse holder and sensor fastening), including carry case | ZB1001PPD1 | |
| Set of instruments holders for extra level(As above) | ZB1001MH1 | |
| Operational for assessing air quality Digital Carbon Dioxide sensor to 10,000ppm, with handle. | FYAD00CO2B10 | |
| Device Selection | ||
| ALMEMO 2690-8A handheld Datalogger, 5 inputs, including mains unit and data cbale, USB can be used for 1 measuring level | MA26908AKSU | |
| ALMEMO 2890-9 hand-held datalogger, 9 inputs, including mains unit, can be used for 3 measuring levels | MA28909 | |
| ALMEMO Data Cable, USB, Electrically isolated | ZA1919DKU | |
| PC link via Ethernet, or wireless with Bluetooth | ||
| Software: | ||
| WinControl for 20 measuring points/ 1 device | SW5600WC1 | |
| Software Additional module for comfort index measurement | SW5600WCZM1 | |
| Carry case, universal, spacious, robust, for Globe thermometer, humidity sensor, and datalogger. Exterior dimension (WxHxD) approx. 51 x 35 x 30cm | ZB5600TK3 | |
| KAkks/DKD or Factory calibration available on request |
