No products in the cart.
Digital atmospheric pressure sensor FDAD12SA
For barometric pressure integrated in Almemo® D6 Plug
- Digital atmospheric pressure sensor with temperature compensation.
- Very accurate over a wide temperature range
- The value measured for atmospheric pressure can also be used to compensate other sensors on the ALMEMO® device (programming designation *P).
- Compact design, without pressure connection sleeve. Can be connected directly to the measurement instrument.
- One measuring channel is programmed (at our factory). Atmospheric pressure (mbar, AP, p)
| DIGITAL ATMOSPHERIC PRESSURE SENSOR. (INTEGRATED IN ALMEMO® D6 PLUG) | |
|---|---|
| Measuring range | 700 to 1100 mbar |
| Accuracy | ±2.5 mbar (at 0 to +65 °C) ±1.8 % RH in the range 10 to 90 % RH at nominal temperature |
| Operating range | -10°C to +60°C, 10 to 90 % RH, non-condensing |
| Dimensions | 62 x 20 x 7.6 mm |
| ALMEMO® D6 plug | |
| Refresh rate | 1 second for all channels |
| Supply voltage | 6 to 13 VDC |
| Current consumption | 4 mA |
FDAF12SA
Digital atmospheric pressure sensor for barometric pressure, integrated in ALMEMO® D6 plug(Includes Manufactures test certificate)
DKD/UKAS Calibration also available please contact us
£152.00 ex VAT | £182.40 Inc VAT Add to basket
Pressure Measuring Connector for Barometric Pressure FDA612SA
With pressure terminal sleeve
- Compact design- can be plugged directly onto measureing instrument
- Piezo-resistive pressure sensor – ensures high measuring accuracy
| DIGITAL ATMOSPHERIC PRESSURE SENSOR. (INTEGRATED IN ALMEMO® D6 PLUG) | |
|---|---|
| Measuring range | 700 to 1050 mbar |
| Accuracy | ±0.5 % of final value |
| Operating range | -10°C to +60°C, 10 to 90 % RH, non-condensing |
| Dimensions | 90 x 20 x 7.6 mm |
| Overload Capacity | Maximum 1.5 times final value |
| Nominal Temperature | 25 °C |
| Temperature Drift | <±1 % final value at 0 to +70 °C |
| Hose Terminals | Ø 5 mm, 12 mm long |
FDA612SA
Pressure measuring connector for barometric pressure with pressure terminal sleeve(Includes Manufactures test certificate)
DKD/UKAS Calibration also available please contact us
£375.00 ex VAT | £450.00 Inc VAT Add to basket