No products in the cart.
Wall mountable Pressure Sensors FD8612xPS
Measure differential, relative or absolute pressure. With a choice of outputs
Overview
- Suitable for use in the laboratory, as well as for use in harsh industrial environments, e.g. HEVAC applications, clean room technology, medical technology, filter technology and finishing pass technology.
- The robust mechanics guarantees long term stability, linearity and good reproducibility.
- Temperature drift reduced to a minimum by specific compensation of the sensors.
- Operation is almost maintenance-free, as a result of the freefrom-wear inductive measuring system.
- As standard, the integrated electronics provide a pressure proportional voltage signal from 0 to 2V as output.
| Linearity: | ±1% of final value, option: ±0.2% or ±0.5% |
| Hysteresis: | ±0.1% of final value |
| Nominal temperature: | 23°C |
| Overload capacity: | up to 400 mb: 5-fold, from 500 mb: 2-fold |
| Max. common mode pressure: | 1 bar (at differential measurement) |
| Power supply: | 6 ... 12 VDC, option: 230V 50/60Hz |
| Power consumption: | approx. 3.5mA |
| Output: | 0 to 2V, option: 0 to 10V/0(4) to 20mA |
| Connection: | electrical: screw terminals, screwed cable gland PG 7, pressure: 6.5mm hose connection |
| Rise time: | T90 approx. 0.02s |
| Temperature drift: Zero point range | 0.03% of final value / K, 0.03% of final value / K |
| Operating range: | +10 to +50°C , air humidity 10 to 90% non-condensing |
| Storage temperature: | –10 to +70°C |
| Housing: | material ABS 120 x 80 x 55mm (L x H x D) Safety class: 0 |
| Protection system: | IP 54 |
| Weight: | approx. 300g |
| Sensor capacity: | approx. 3ml |
| Volume increase: | approx. 0.2ml at nom. press.k |
| Measuring ranged relative and differential pressure: | |
| Pressure transducer type DPS 0 to 2.5 mbar ... 1000 mbar Please specify measuring range | FD8612DPS |
| Range 1 mbar (100 Pa), additional charge | OD8612DPS |
| Range 0.5 mbar (50 Pa), additional charge | OD8612P05 |
| Measuring ranges absolute pressure: | |
| Pressure transducer type APS 0 to 1000 mbar, 900 to 1100 mbar, 800 to 1200 mbar Please specify measuring range | FD8612APS |
| DAkks/DKD or factory calibration KD9xxx pressure for sensor or measuring chain (sensor + device) please contact us | |
