No products in the cart.
Showing 1–48 of 71 results
£14.00 ex VAT | £16.80 Inc VAT
The adapter fits into a standard prototyping board or National Instruments’ ELVIS prototyping board, providing easy access to the sensor lines. Vernier analog sensors require a 5 volt source and in most cases provide a 0 – 5 volt raw signal.
Add to basket
£16.00 ex VAT | £19.20 Inc VAT
This connector makes it easy to wire the signal from a Vernier digital sensor into a non-Vernier interface.
Add to basket
£45.00 ex VAT | £54.00 Inc VAT
Replacement high-capacity, rechargeable, lithium-ion battery for LabQuest 3.
Add to basket
£160.00 ex VAT | £192.00 Inc VAT
The LabQuest® Battery Boost 3 is a rechargeable external battery for your original LabQuest, LabQuest 2, LabQuest 3, or LabQuest Stream® interface. It is also compatible with Go Direct® Sensors. With the added power of an external battery, data can be collected for extended periods in the field where AC power is not available.
Add to basket
£12.00 ex VAT | £14.40 Inc VAT
This cable is used to connect a computer or Chromebook™ with USB-C ports to a Go Direct® Sensor or a LabQuest® 3.
Add to basket
£12.00 ex VAT | £14.40 Inc VAT
The lanyard works as a LabQuest 3 neck strap to prevent accidental drops while doing field studies.
Add to basket
£8.00 – £28.00
A latex- and phthalate-free accessory, the Gas Pressure Sensor Bulb is designed to be used with the Gas Pressure Sensor to easily perform grip strength measurements. Choose either 1 bulb or a pack of 4 bulbs.
Select options
£38.00 ex VAT | £45.60 Inc VAT
The Go Direct® Bluetooth Adapter enables older models of LabQuest 2 to wirelessly communicate with Go Direct sensors. This adapter is for use with LabQuest 2 units (Model: LABQUEST2) running LabQuest app software version 2.5 or newer.
Add to basket
OUT NOW
Featuring; NEW Almemo 500 Wifi enable data acquisition system NEW D7 Plug Technology NEW Almemo 8036-9 Multi Channel Reference Device NEW Chamber Calibration Download a PDF copy of the Catalogue here OR Request a paper below
£5.00 ex VAT | £6.00 Inc VAT
Replacement Wind Screen for Sound Meters. This wind screen fits all Sper Scientific digital sound meters.
Add to basket
£1,000.00 ex VAT | £1,200.00 Inc VAT
Weather-proof housing for ALMEMO® 809, lockable transparent door, mast fixture, integrated rail for fastening ALMEMO® 809 device including mains unit ZB1212NA9 for supplying the device permanently fitted sensor connection cable for sensor FMD7-60 integrated mains unit for supplying sensor heating and sensor ventilation. Option of weather-proof housing for sensor FMD760. Excludes Almemo 809 and FMD760 Sensor.
Add to basket
£1,000.00 ex VAT | £1,200.00 Inc VAT
Weather-proof housing for ALMEMO® 710, lockable transparent door, mast fixture, integrated rail for fastening ALMEMO® 710WG device including mains unit ZA1312NA9 for supplying the device permanently fitted sensor connection cable for sensor FMD7-60 integrated mains unit for supplying sensor heating and sensor ventilation. Option of weather-proof housing for sensor FMD760. Excludes Almemo 710 and FMD760 Sensor.
Add to basket
£3.60 ex VAT | £4.32 Inc VAT
Notched steel ring for use with ZT9432KV. Once this item has been fitted, it cannot be removed.
Add to basket £3.60 ex VAT | £4.32 Inc VAT
Notched steel ring for use with ZT9431KV. Once this item has been fitted, it cannot be removed.
Add to basket £16.50 ex VAT | £19.80 Inc VAT
Clamp screw connection for sheathed elements. This item will come with a PTFE clamping ring.
Add to basket
£1,000.00 ex VAT | £1,200.00 Inc VAT
Weather-proof housing for ALMEMO® 202, lockable transparent door, mast fixture integrated rail for fastening ALMEMO® 202 device including mains unit ZA1312NA9 for supplying the device permanently fitted sensor connection cable for sensor FMD760 integrated mains unit for supplying sensor heating and sensor ventilation. Option of weather-proof housing for sensor FMD760. Excludes Almemo 202 and FMD760 Sensor.
Add to basket
£78.00 ex VAT | £93.60 Inc VAT
Carry bag for FMD760 meteorological sensor. Space for one tripod including accessories and two probe head holders.
Add to basket £475.00 ex VAT | £570.00 Inc VAT
Mobile tripod extendable up to approximately 4.4 meters. Including a set of anchoring fixtures, comprising three karabiners, threee guy lines (4 meters long) and three ground pegs.
Add to basket £485.00 ex VAT | £582.00 Inc VAT
Li-Ion battery pack for Almemo 500, 13.8 Ah. Required space: 2 slots. Includes mains adapter ZB1212NA10.
Add to basket £630.00 ex VAT | £756.00 Inc VAT
Multi-point adjustment or linearization can be programmed by the customer with any ALMEMO® plug version.
Add to basket
£22.00 ex VAT | £26.40 Inc VAT
Heat-conducting paste for surface measurement. This has an operative range of -30 to +200° C and comes in a 12ml tube.
Add to basket
ALMEMO® 2m connecting cable with transducer, for probes with SMEK plug-on head.
Read more
£138.00 – £178.00
ALMEMO® connecting cable with transducer for redox probes (ALMEMO® connector, spray-coated). For probes with plug-on head S7/SN6 (coaxial connector, screw-fit) Transducer: High-impedance measuring amplifier (>500 Gohm), integrated in the ALMEMO® connector
Select options £138.00 – £178.00
ALMEMO® connecting cable with transducer for pH Probe (ALMEMO® connector, spray-coated). For probes with plug-on head S7/SN6 (coaxial connector, screw-fit). Transducer: High-impedance measuring amplifier (>500 Gohm), integrated in the ALMEMO® connector.
Select options 
£720.00 ex VAT | £864.00 Inc VAT
Maintenance set for Ozone Sensor. Includes new electro-chemical measuring cell, pump replacement and readjustment including calibration certificate.
Add to basket £58.00 ex VAT | £69.60 Inc VAT
Extension tube, Ø 8 mm, length 97 mm, plug-in, for FHAD462
Add to basket £15.50 ex VAT | £18.60 Inc VAT
Connecting flange for screw connection, hole circle 38 mm Ø
Add to basket £15.50 ex VAT | £18.60 Inc VAT
Movable Brass Screw Connection with plastic sealing ring.
Add to basket