No products in the cart.
Year Warranty| Interface | LabQuest App |
|---|---|
| Full Support | |
LabQuest 2 (Discontinued) | Full Support |
| Labquest 1 (discontinued) | Full Support |
Product Description
£93.00 ex VAT | £111.60 Inc VAT
The Barometer can be used to measure and monitor atmospheric pressure. It works well for conducting weather studies or experiments that involve pressures close to normal atmospheric pressure. It can also be used as an altimeter if you have a portable interface.
Available to Order
Email to a friendExperiments
The Barometer can be found in the following Vernier Lab Books:-
- Barometric Pressure
Specification
- Sensing Element: SenSym SDX15A4
- Pressure Range: 0.8 to 1.05 atm (25 to 31.5 in of Hg)
- Maximum pressure that the sensor can tolerate without permanent damage: 2.04 atm or 61 in of Hg
- Sensitivity: 436 mV/in of Hg to 13.06 V/atm.
- Resolution: 1.0026 X 10-4 atm (0.003 in of Hg) (LabQuest, LabQuest Mini, Go!Link)
- Combined Linearity and Hysteresis: Typical ±0.1% full scale, maximum ±0.5% full scale
- Response Time: 100 microseconds
Requirements
Choose a platform below to see compatible interface and software options.
| Interface | Software | ||
|---|---|---|---|
| Graphical Analysis for Computers Version 5.4 | Logger Pro Version 3.16 | Logger Lite Verison 1.9.4 | |
| LabQuest Mini | Full support | Full support | Full support |
| LabQuest 3 | Full support | Full support | Full support |
| LabQuest 2 (Discontinued) | Full support | Full support | Full support |
| LabQuest Stream | Full support1 | Full support | Full support1 |
| Go!Link | Full support | Full support | Full support |
| Original LabQuest (Discontinued) | Full support | Full support | Full support |
| LabPro (Discontinued) | Incompatible | Full support | Full support |
COMPATIBILITY NOTES
1. Connect LabQuest Stream via USB. Wireless connection is not supported.
| Interface | Software |
|---|---|
| Graphical Analysis for Chrome Version 5.4 | |
| LabQuest Mini | Full support |
| LabQuest 3 | Full support |
| LabQuest 2 (Discontinued) | Full support |
| LabQuest Stream | Full support1 3 |
| Go!Link | Full support |
| Original LabQuest (Discontinued) | Full support |
COMPATIBILITY NOTES
1. Connect LabQuest Stream via USB. Wireless connection is not supported.
| Interface | Software | |
|---|---|---|
| Graphical Analysis App for iOS Version 5.4 | Graphical Analysis GW Verison 4.0.6 | |
| LabQuest Stream | Full support | Full support |
| LabQuest 3 | Full support 1 | Full support 1 |
| LabQuest 2 (Discontinued) | Full support 1 | Full support 1 |
COMPATIBILITY NOTES
1.Mobile devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
| Interface | Software | |
|---|---|---|
| Graphical Analysis App for Android Version 5.4 | Graphical Analysis GW Verison 3.2 | |
| LabQuest Stream | Full support | Full support |
| LabQuest 3 | Full support 1 | Full support 1 |
| LabQuest 2 (Discontinued) | Full support 1 | Full support 1 |
COMPATIBILITY NOTES
1.Mobile devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
Related Products
Use the Charge Sensor as an electronic electroscope to obtain quantitative measurements when studying charging by induction, friction, or contact.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
This is a non-invasive sensor designed to measure human blood pressure. It measures systolic, diastolic and mean arterial pressure utilizing the oscillometric technique. Pulse rate is also reported.
£142.00 ex VAT | £170.40 Inc VAT Add to basket
The Flow Rate Sensor can be used for environmental or Earth science studies. Flow rate data can be used to calculate the discharge value for a stream or determine the sediment transport of a stream. The Flow Rate Sensor includes 3 riser rods, which enable the impeller to be placed at fixed depths, and is equipped with a 5 m cable so your data-collection equipment can stay on shore. The Flow Rate Sensor also separates into four sections for easy transport and convenient storage.
£168.00 ex VAT | £201.60 Inc VAT Add to basket
Designed for much higher forces than the Dual-Range Force Sensor, the Force Plate can measure the forces developed during stepping, jumping, and other human-scale actions. For example, you can perform the following kinds of experiments:
£376.00 ex VAT | £451.20 Inc VAT Add to basket- Observe the change in normal force during a ride in a lift.
- Measure the impulse delivered by the floor during a jump.
- Measure the reaction force as a student leans against a wall.
This is basically three Low-g Accelerometers mounted at right angles and all placed in a small box. Can be used for studying the complex motion of an amusement park ride, a bungee jumper, or simply a toss in the air.
Range: -50 to +50 m/s2
Typical accuracy: ±0.1 m/s2
£129.00 ex VAT | £154.80 Inc VAT Add to basket
The Mini GC Plus has been replaced by the Go Direct Mini GC.
The Mini GC Plus is a portable instrument for separating, analyzing, and identifying substances contained in a volatile liquid or gaseous sample. The Mini GC uses Air as its carrier gas so no external gas cylinders required.
The Anemometer can be used in a variety of experiments to measure wind speed. Can either be used hand held to measure wind speeds, or used with the accessory rod for static experiments such as in front of wind tunnels. The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30 m/s (1 to 67 mph).
£116.00 ex VAT | £139.20 Inc VAT Add to basket
Use the Drop Counter to perform accurate, automatic titrations. Record the number of drops or calibrate the drop size to record volume of titrant added during a titration. Logger Pro software can automatically convert the number of drops into volume. The Drop Counter can be used for conductimetric or potentiometric titrations using our Conductivity Probe, Ion-Selective Electrodes or any electrode with a 0 to 5 volt output.
£129.00 ex VAT | £154.80 Inc VAT Add to basket
This sensor is used to measure voltages in the range of -30 to +30 volts
£64.00 ex VAT | £76.80 Inc VAT Add to basket
The Gas Pressure Sensor can be used to monitor pressure changes in a gas. The range is wide enough to perform Boyle's law yet it is sensitive enough to conduct vapor-pressure or pressure-temperature experiments. Biology teachers can use the Gas Pressure Sensor to monitor transpiration or respiration in an enclosed environment.
£116.00 ex VAT | £139.20 Inc VAT Add to basket
The Digital Control Unit (DCU), combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM and engineering projects.
£80.00 ex VAT | £96.00 Inc VAT Add to basket
Use the Dual-Range Force Sensor in a wide variety of experiments including the study of friction, simple harmonic motion, impact in collisions, or centripetal force. The Dual-Range Force Sensor has two ranges: ±10N or ±50N. It can be easily mounted on a Vernier Dynamics Cart for use with the Vernier Dynamics System. Mount one on the New Centripetal Force Apparatus, on a ring stand or even as a replacement for a hand-held spring scale. Use it to study friction, simple harmonic motion, impact in collisions, or centripetal force.
£142.00 ex VAT | £170.40 Inc VAT Add to basket
This sensor can be used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample.
£155.00 ex VAT | £186.00 Inc VAT Add to basket
The Polarimeter can be used to measure chiral properties of optically active samples without chemically modifying or destroying the sample. This is a vertical polarimeter that uses a 589 nm LED, a fixed polarizer, and a manually rotated polarizer to detect changes in rotation of plane-polarized light in the presence of an optically active compound. Used with Vernier technology, students no longer have to determine the optical maximum with their eye but have a graph that shows a clear change in the light's polarization.
£649.00 ex VAT | £778.80 Inc VAT Add to basket
The CO2 Gas Sensor measures gaseous carbon dioxide levels in two selectable ranges of 0 to 10,000 ppm and 0 to 100,000 ppm (which covers human breath). Ideal for measuring changes in Carbon Dioxide levels during plant photosynthesis and respiration. You can easily monitor changes in CO2 levels occurring in respiration of organisms as small as crickets or beans! The CO2 Gas Sensor is easily calibrated using a calibration button. A chamber is included for running controlled experiments with small plants and animals. You may also wish to see our O2 Gas Sensor
£350.00 ex VAT | £420.00 Inc VAT Add to basket