Navigation

Calcium Ion-Selective Electrode

Calcium Ion-Selective Electrode

£438.00 ex VAT | £525.60 Inc VAT

The Calcium Ion-Selective Electrode (ISE) can be used to measure the concentration of Calcium (Ca2+) in aqueous samples.

Available to Order

Contact via Whatsapp 01530 832500

Description

Data from the Calcium ISE can give a good indication of hardness of water (as Ca2+). The concentration of Calcium is also used as an endpoint indicator in EDTA-Ca/Mg hardwater titrations.

The Calcium ISE has a combination-style, non-refillable, gel-filled electrode. Like all other PVC ISE membranes, the membrane on the ISE has a limited life expectancy. However, the replaceable module of ISE allows you to simply discard the used membrane module, and replace it with a new one.

Note: We recommend that you do not purchase ISE replacement modules too far in advance of their expected time of use as degradation occurs while they are stored on the shelf.

Important: Ion-Selective Electrodes require good chemical technique and careful calibration to obtain accurate results; they are not recommended for middle school or elementary students.

Specification

  • Range (concentration): 1 to 40,000 mg/L (or ppm)
  • Reproducibility (precision): ± 10% of full scale (calibrated 10 to 1000 mg)
  • Interfering Ions: Pb2+, Hg2+, Si2+, Fe2+, Cu2+, Ni2+, NH3, Na+, Tris+, Li+, K+, Ba2+, Zn2+, Mg2+
  • pH Range (concentration): 2–8 (no pH compensation)
  • Temperature range: 0-40°C (no temperature compensation)
  • Electrode Slope: +26 mV/decade at 25°C
  • Electrode Resistance: 100 MΩ
  • Immersion: 2.8 cm (1.1 in)
  • Electrode length 155 mm
  • Body diameter: 12 mm
  • Cap diameter: 16 mm
  • Cable length: 100 cm

Requirements

Choose a platform below to see compatible interface and software options

InterfaceLabQuest App
LabQuest 3

Full Support
LabQuest 2
(Discontinued)
Full Support
Vernier LabQuest
(Discontinued)
Full Support

InterfaceSoftware
Graphical Analysis for ComputersLogger Pro
(Discontinued)
Logger Lite
(Discontinued)
LabQuest MiniFull supportFull supportFull support
LabQuest 3Full supportFull supportIncompatible
LabQuest 2
(Discontinued)
Full supportFull supportFull support
LabQuest Stream
(Discontinued)
USB OnlyFull supportUSB Only
Go!LinkNot supportedNot supportedNot supported
Original LabQuest
(Discontinued)
Full supportFull supportFull support
LabPro
(Discontinued)
IncompatibleFull supportFull support

InterfaceSoftware
Graphical Analysis (Web App)
LabQuest MiniFull support
LabQuest 3Full support
LabQuest 2
(Discontinued)
Full support
LabQuest Stream
(Discontinued)
Full Support1
Vernier LabQuest
(Discontinued)
Full support

InterfaceSoftware
Graphical Analysis
LabQuest 3Full support 1
LabQuest Stream
(Discontinued)
Full support
LabQuest 2
(Discontinued)
Full support 1

COMPATIBILITY NOTES
1.Mobile devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing

InterfaceSoftware
Graphical Analysis
LabQuest 3Full support 1
LabQuest 2
(Discontinued)
Full support 1
LabQuest Stream
(Discontinued)
Full support

COMPATIBILITY NOTES
1.Mobile devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.

What's Included

  • Vernier Calcium Ion-Selective Electrode
  • 30 mL bottle of Calcium Low Standard (10 mg/L or 10 ppm  Ca2+)
  • 30 mL bottle of Calcium High Standard (1000 mg/L or 1000 ppm  Ca2+)
  • Short-term ISE soaking bottle
  • User manual