No products in the cart.
Year WarrantyThe Chloride Ion-Selective Electrode is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.
Learn more about LabQuest 2 »
Product Description
£285.00 ex VAT | £342.00 Inc VAT
The concentration of the Chloride ion gives a quick measurement of salinity of water samples. Use the Chloride ISE to measure chloride levels in ocean saltwater or salt in food samples.
The Chloride ISE has a combination-style, non-refillable, gel-filled electrode. Unlike other ISEs available from Vernier, the Chloride ISE has a solid-state membrane that does not need to be replaced.
Available to Order
Email to a friendExperiments
The Chloride Ion Selective Electrode can be found in the following Vernier Lab Book:-
- Chloride and Salinity
What's Included
- Vernier Chloride Ion-Selective Electrode
- 30 mL bottle of Chloride Low Standard (10 mg/L)
- 30 mL bottle of Chloride High Standard (1000 mg/L)
- Short-term ISE soaking bottle
- User manual
Specification
- Range: 1.8 to 35,500 mg/L or ppm (5×10-5 M to 1.0 M)
- Resolution (LabQuest, LabQuest Mini, Go!Link, LabPro): % of reading 0.7%, Low scale reading 1.8 ±0.013, High Scale Reading 35,500 ±250 mg/L
- pH Range: 2 to 12
- Interfering Ions: CN-, Br-, I-, S2-
- Electrode Slope (log voltage vs. concentration): -56 mV/decade
Sensor Requirements
The Chloride Ion-Selective Electrode may require a compatible interface and software. Choose a platform below to see compatible interface and software options.
| Interface | Software | ||
|---|---|---|---|
| Graphical Analysis for Computers Version 5.4 | Logger Pro Version 3.16 | Logger Lite Verison 1.9.4 | |
| LabQuest Mini | Full support | Full support | Full support |
| LabQuest 3 | Full support | Full support | Full support |
| LabQuest 2 (Discontinued) | Full support | Full support | Full support |
| LabQuest Stream | Full support1 | Full support | Full support1 |
| Go!Link | Full support | Full support | Full support |
| Original LabQuest (Discontinued) | Full support | Full support | Full support |
| LabPro (Discontinued) | Incompatible | Full support | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
- A computer with a compatible Bluetooth® 4.0 radio is required. Only computers running Windows 10 or Mac OS X 10.10 or newer are supported.
| Interface | Software |
|---|---|
| Graphical Analysis for Chrome Version 5.4 | |
| LabQuest Mini | Full support |
| LabQuest 3 | Full support |
| LabQuest 2 (Discontinued) | Full support |
| LabQuest Stream | Full support1 3 |
| Go!Link | Full support |
| Original LabQuest (Discontinued) | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
| Software | ||
|---|---|---|
| Interface | Graphical Analysis for iOS | Graphical Analysis for Android |
| LabQuest Stream | Future support | Future support |
| LabQuest 2 | Full support1 | Full support1 |
| Go Wireless Link | Future support | Future support |
COMPATIBILITY NOTES
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
The Vernier Go Wireless Exercise Heart Rate is an excellent hands-free option for continuously monitoring heart rate before, during, and after exercise or while a person is stationary. Using the chest strap, data are wirelessly transmitted to iPad, LabQuest 2, or other mobile devices that are Bluetooth® Smart Ready. It displays live heart readouts before data collection,and is ideal for running, cycling and other physical activities. For an option to monitor heart rate with hands, please consider the Go Wireless Heart Rate.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The Anemometer can be used in a variety of experiments to measure wind speed. Can either be used hand held to measure wind speeds, or used with the accessory rod for static experiments such as in front of wind tunnels. The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30 m/s (1 to 67 mph).
£116.00 ex VAT | £139.20 Inc VAT Add to basket
The Current Probe can be used to measure currents in low-voltage AC and DC circuits or electrochemistry experiments. The Current Probe measures DC and low-frequency AC currents up to 600 mA.
£51.00 ex VAT | £61.20 Inc VAT Add to basket
The Vernier Optical DO Probe uses luminescent technology to provide fast, easy, and accurate results, making it a terrific choice for biology, ecology, or environmental science courses. Students can measure dissolved oxygen concentration in surface water or to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Using Plug and play technology, no filling solution is required, no warm up time needed, no stirring and no calibration.
£389.00 ex VAT | £466.80 Inc VAT Add to basket
Our Hand-Grip Heart Rate Monitor is ideal for determining a person's heart rate while mobile or stationary. With this sensor, heart rate can be monitored during, or after, exercise. The sensor consists of wireless hand grips and a receiver module that plugs into any of our data-collection devices. The hand grips sense the electrical signals generated by the heart. For each pulse detected, a signal is transmitted to the receiver module, and the individual's pulse rate is calculated. Do you need an interface? Why not go for our Heart Rate Human Physiology Kit?
£155.00 ex VAT | £186.00 Inc VAT Add to basket
The Mini GC Plus has been replaced by the Go Direct Mini GC.
The Mini GC Plus is a portable instrument for separating, analyzing, and identifying substances contained in a volatile liquid or gaseous sample. The Mini GC uses Air as its carrier gas so no external gas cylinders required.
Ideal for most acceleration experiments. Use it for studying the one-dimensional motion of a car (real and toy), lift, pendulum bob, or amusement park ride.
£116.00 ex VAT | £139.20 Inc VAT Add to basket- Range: -50 to +50 m/s2
- Typical accuracy: ±0.1 m/s
Use the High Current Sensor in experiments that involve currents larger than 1 A, such as solar panels, hand generators, and other alternative energy projects. The High Current Sensor has a range of ±10 A. Current is measured with a Hall Effect sensor, which uses the magnetic field created by the current and therefore does not add a resistive element to the circuit. A metal shield over the Hall Effect chip reduces the influence of external magnets. A replaceable fuse protects the equipment and circuit
£103.00 ex VAT | £123.60 Inc VAT Add to basket
Use the Charge Sensor as an electronic electroscope to obtain quantitative measurements when studying charging by induction, friction, or contact.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
Use the Dissolved Oxygen Probe to determine the concentration of oxygen in aqueous solutions in the field or in the laboratory. The Dissolved Oxygen Probe is great for biology, chemistry, ecology, or integrated science courses. It can be used to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Also see our NEW Optical Dissolved Oxygen Probe
£298.00 ex VAT | £357.60 Inc VAT Add to basket
Our strain-gauge based isometric Hand Dynamometer can be used to measure grip strength, pinch strength, and to perform muscle fatigue studies. Use the hand dynamometer with other sensors (e.g., EKG Sensor) to study muscular health and activity
£144.00 ex VAT | £172.80 Inc VAT Add to basket
The Constant Current System is a DC power source with a built-in current probe designed for use in electrochemistry experiments, and as such eliminates the need for a separate power supply when performing electroplating and electrolysis experiments in Chemistry. It is capable of delivering 0.6 A at 5VDC Use the Constant Current System to explore Faraday's law and determine Avogadro's Number. Note: It can only be used in conjunction with its own built-in power supply. It cannot be used to measure the current of a circuit using a different power supply.
£90.00 ex VAT | £108.00 Inc VAT Add to basket
This sensor is used to measure voltages in the range of -30 to +30 volts
£64.00 ex VAT | £76.80 Inc VAT Add to basket
The Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This has many applications in chemistry, biology, and environmental science. The Conductivity Probe has three ranges, providing optimal precision in any given range. Biology teachers can use this probe to demonstrate diffusion of ions through membranes. Chemistry students are able to quickly investigate the difference between ionic and molecular compounds, strong and weak acids, or ionic compounds that yield different ratios of ions. Environmental science students use it to measure TDS, total dissolved solids.
£129.00 ex VAT | £154.80 Inc VAT Add to basket
The Digital Control Unit (DCU), combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM and engineering projects.
£80.00 ex VAT | £96.00 Inc VAT Add to basket