No products in the cart.
Year WarrantyThe Conductivity Probe is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.
Learn more about LabQuest 2 »
Product Description
£129.00 ex VAT | £154.80 Inc VAT
The Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This has many applications in chemistry, biology, and environmental science.
The Conductivity Probe has three ranges, providing optimal precision in any given range. Biology teachers can use this probe to demonstrate diffusion of ions through membranes. Chemistry students are able to quickly investigate the difference between ionic and molecular compounds, strong and weak acids, or ionic compounds that yield different ratios of ions. Environmental science students use it to measure TDS, total dissolved solids.
Available to Order
Experiments
The Conductivity Probe can be found in the following Vernier Lab books:-
Investigating Environmental Science through Enquiry
- Water Quality
- Long Term Water Monitoring
- Water Treatment
- Investigating Salinity
- Soil Salinity
- Water Cycle Column Investigations
- Ecocolumn Investigations
- The Effect of Acid Deposition on Aquatic Ecosystems
- Limitations on Cell Size: Surface Area to Volume
- Diffusion through Membranes
- Conducting Solutions
- Watershed Testing
- Physical Profile of a Lake
Agricultural Science with Vernier
- Diffusion through Membranes
- Conducting Solutions
- Soil Salinity
- Watershed Testing
Investigating Chemistry through Enquiry
- Conductivity of Aqueous Solutions
- Long Term Water Monitoring
- Conductimetric Titrations
- Properties of Solutions: Electrolytes and Non-Electrolytes
- Conductivity of Solutions: The Effect of Concentration
- Using Conductivity to Find an Equivalence Point
- Drug Tests
- No Dumping
Investigating Biology through Enquiry
- Diffusion
- Long Term Water Monitoring
- Diffusion through Membranes
Advanced Chemistry with Vernier
- Conductimetric Titration and Gravimetric Determination of a Precipitate
- The Base Hydrolysis of Ethyl Acetate
- Neutralisation Reactions
- Conducting Solutions
- Conductivity of Saltwater: The Effect of Concentration
- Acid Strengths
Middle School Science with Vernier
- Water Hardness Study
- Diffusion: How Fast?
- A Water Field Study
- Soil Salinity
- Total Dissolved Solids
- Water Treatment
- Salinity of Ocean Water
- Desalination
- Total Dissolved Solids
- Chloride and Salinity
- Physical Profile of a Lake
Specification
- Automatic Temperature Compensation: 5°C – 35°C
- Low range: 0 to 200 μS/cm (0 to 100 mg/L TDS)
- Mid Range: 0 to 2000 μS/cm (0 to 1000 mg/L TDS)
- High Range: 0 to 20,000 μS/cm (0 to 10,000 mg/L TDS)
Sensor Requirements
The Conductivity Probe may require a compatible interface and software. Choose a platform below to see compatible interface and software options.
| Interface | Software | ||
|---|---|---|---|
| Graphical Analysis 4 for Computers | Logger Pro | Logger Lite | |
| LabQuest Mini | Full support | Full support | Full support |
| LabQuest 2 | Full support | Full support | Full support |
| LabQuest Stream | Full support1 | Full support1 | Full support1 |
| Go!Link | Full support | Full support | Full support |
| Original LabQuest (DISCONTINUED) | Full support | Full support | Full support |
| LabPro (DISCONTINUED) | Incompatible | Full support | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
- A computer with a compatible Bluetooth® 4.0 radio is required. Only computers running Windows 10 or Mac OS X 10.10 or newer are supported.
| Interface | Software Graphical Analysis 4 for Chrome |
|---|---|
| LabQuest Mini | Full support |
| LabQuest 2 | Full support |
| LabQuest Stream | Full support1 |
| Go!Link | Full support |
| Original LabQuest (DISCONTINUED) | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
| Software | ||
|---|---|---|
| Interface | Graphical Analysis for iOS | Graphical Analysis for Android |
| LabQuest Stream | Partial Support1 | Partial Support1 |
| LabQuest 2 | Full support2 | Full support2 |
| Go Wireless® Link | Partial Support1 | Partial Support1 |
COMPATIBILITY NOTES
- Data can be collected using the sensor’s default calibration. Future software updates will support calibration modifications.
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
The Vernier Go Wireless Exercise Heart Rate is an excellent hands-free option for continuously monitoring heart rate before, during, and after exercise or while a person is stationary. Using the chest strap, data are wirelessly transmitted to iPad, LabQuest 2, or other mobile devices that are Bluetooth® Smart Ready. It displays live heart readouts before data collection,and is ideal for running, cycling and other physical activities. For an option to monitor heart rate with hands, please consider the Go Wireless Heart Rate.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The Vernier Energy Sensor offers an easy way to quantify voltage, current, power, and energy output of small wind turbines and solar panels such as those used in our KidWind Experiment Kits. Simply connect a source such as a small wind turbine or solar panel to one side and a load such as the Variable Load or a resistor on the Vernier Resistor Board to the other side. The Energy Sensor measures the current and voltage of the system. Data-collection and analysis software, such as Logger Pro or LabQuest App can then calculate the power and energy output.
£115.00 ex VAT | £138.00 Inc VAT Add to basket
The Instrumentation Amplifier monitors voltages from 20 mV to 1 V (DC or AC). It has several switch settings to allow you to select the best gain and includes auto-ID functionality for each of the six ranges. Input bandwidth of 10 kHz allows the capture of higher frequency signals. It is typically used to amplify the chart recorder or analog output of any instrument, such as a third-party gas chromatograph.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The Vernier Go Wireless Heart Rate is ideal for continuously monitoring heart rate before, during, and after exercise or while a person is stationary. Data are wirelessly transmitted to iPad, LabQuest 2, or other mobile devices that are Bluetooth® Smart Ready. It is simple and easy to use, displays live heart rate readouts before data collection, and is easy to clean and share between students.
£116.00 ex VAT | £139.20 Inc VAT Add to basket
The EKG Sensor measures electrical signals produced during muscle contractions, and can be used to make standard 3-lead EKG tracings or surface EMG recordings. The EKG Sensor measures electrical signals produced by the heart. It uses three disposable electrodes. An EKG graph is displayed, demonstrating to students the contraction and repolarization of the heart's chambers. A package of 100 disposable electrodes is included with the sensor.
£206.00 ex VAT | £247.20 Inc VAT Add to basket
The Gas Pressure Sensor can be used to monitor pressure changes in a gas. The range is wide enough to perform Boyle's law yet it is sensitive enough to conduct vapor-pressure or pressure-temperature experiments. Biology teachers can use the Gas Pressure Sensor to monitor transpiration or respiration in an enclosed environment.
£116.00 ex VAT | £139.20 Inc VAT Add to basket
The Polarimeter can be used to measure chiral properties of optically active samples without chemically modifying or destroying the sample. This is a vertical polarimeter that uses a 589 nm LED, a fixed polarizer, and a manually rotated polarizer to detect changes in rotation of plane-polarized light in the presence of an optically active compound. Used with Vernier technology, students no longer have to determine the optical maximum with their eye but have a graph that shows a clear change in the light's polarization.
£649.00 ex VAT | £778.80 Inc VAT Add to basket
The Anemometer can be used in a variety of experiments to measure wind speed. Can either be used hand held to measure wind speeds, or used with the accessory rod for static experiments such as in front of wind tunnels. The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30 m/s (1 to 67 mph).
£116.00 ex VAT | £139.20 Inc VAT Add to basket
The Digital Control Unit (DCU), combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM and engineering projects.
£80.00 ex VAT | £96.00 Inc VAT Add to basket
The Mini GC Plus is a portable instrument for separating, analyzing, and identifying substances contained in a volatile liquid or gaseous sample. The Mini GC uses Air as its carrier gas so no external gas cylinders required.
£2,720.00 ex VAT | £3,264.00 Inc VAT Add to basket
The Goniometer measures the angle of a joint, such as the knee or elbow. Use it to analyze the range of motion of a limb during different types of physical activity.
£207.00 ex VAT | £248.40 Inc VAT Add to basket
The Flow Rate Sensor can be used for environmental or Earth science studies. Flow rate data can be used to calculate the discharge value for a stream or determine the sediment transport of a stream. The Flow Rate Sensor includes 3 riser rods, which enable the impeller to be placed at fixed depths, and is equipped with a 5 m cable so your data-collection equipment can stay on shore. The Flow Rate Sensor also separates into four sections for easy transport and convenient storage.
£168.00 ex VAT | £201.60 Inc VAT Add to basket
Our Hand-Grip Heart Rate Monitor is ideal for determining a person's heart rate while mobile or stationary. With this sensor, heart rate can be monitored during, or after, exercise. The sensor consists of wireless hand grips and a receiver module that plugs into any of our data-collection devices. The hand grips sense the electrical signals generated by the heart. For each pulse detected, a signal is transmitted to the receiver module, and the individual's pulse rate is calculated. Do you need an interface? Why not go for our Heart Rate Human Physiology Kit?
£155.00 ex VAT | £186.00 Inc VAT Add to basket
The Differential Voltage Probe is designed for exploring the basic principles of electricity. Use this probe to measure voltages in low voltage AC and DC circuits.
£51.00 ex VAT | £61.20 Inc VAT Add to basket