No products in the cart.
Application Ideas for Ahlborn
Suggested uses for the Ahlborn range.
See examples of how the Ahlborn range could be used.
Product Description
£485.00 ex VAT | £582.00 Inc VAT
Measuring ranges ±1250 Pa. Differential pressure 1 to 40m/s.
- Pressure measuring connector in compact design for flow measurement with Pitot tubes.
- Fitting for connecting hose between Pitot tube and pressure measuring connector.
- Pressure measuring connector can be plugged directly onto the measuring instrument.
- Includes a manufacturers test certificate and a set of 2m silicone hoses.
Available to Order
Email to a friendTechnical Specification
| TECHNICAL DATA | |
|---|---|
| Measuring Range: | ±1250 Pa |
| Differential Pressure: | 1 to 40m/s |
| Measured Ranges: | m/s, Pa |
| Measuring Connector, Independent of Position. | |
| Overload Capacity: | Maximum three times final value |
| Accuracy: (Zero-pt adjusted) | ±0.5% of final value in range 0 to positive final value. |
| Max. common mode pressure: | 700 mbar |
| Nominal temperature: | 25°C |
| Temperature Drift: | <±1.5 % of final value. |
| Compensated temperature range: | 0 to +70°C |
| Operating range: | -10 to +60°C, 10 to 90% RH non-condensing |
| Dimensions: | 74 x 20 x 8.8mm *See note below. |
| Hose Terminals: | Ø 5mm, 12mm long |
| Sensor Material: | aluminium, nylon, silicone, silica gel, brass |
| *Note: When used in conjunction with the ALMEMO® 2890, 5690, 5790, 8590, 8690 : The new pressure measuring connector is very slightly higher (8.8 mm). As a result adjacent input sockets on the ALMEMO® device may be partly covered. However, the 1st input socket can always be used without restriction. Or, alternatively, the connector can be plugged in to any input socket using connecting cable ZA9060AK1. | |
Related Products
Measuring ranges ±6800 Pa. Differential pressure 2 to 90m/s.
£417.00 ex VAT | £500.40 Inc VAT Add to basket- Pressure measuring connector in compact design for flow measurement with Pitot tubes.
- Fitting for connecting hose between Pitot tube and pressure measuring connector.
- Pressure measuring connector can be plugged directly onto the measuring instrument.
- Includes a manufacturers test certificate and a set of 2m silicone hoses.
