Digital ALMEMO® D6 measuring module for DC current

£483.00

Contact via Whatsapp 01530 832500

Technical Specification

Input sockets:	Safety sockets CAT III, 20 A, Ø 4 mm
Galvanic isolation:	6 kV
Sampling rate:	1 kHz internal
Refresh rate:	depending on measuring cycle / conversion rate of the ALMEMO® measuring device
Measuring range:	See variations
Resolution: ZAD901AB1 ZAD901AB2 ZAD901AB3 ZAD901AB5	0.01 mA 0.1 mA 0.001 A 0.01 A
Overload: ZAD901AB1 ZAD901AB2 ZAD901AB3 ZAD901AB5	±500 mA ±500 mA ±4 A ±20 A
Internal resistance: ZAD901AB1 ZAD901AB2 ZAD901AB3 ZAD901AB5	4.7 Ohm 1 Ohm 100 mOhm 8 mOhm
Accuracy:	±0,1% of fin. val.±2 Digit
Nominal conditions:	23 °C ±2 K, 10 to 90% RH (non-condensing)
Temperature drift:	max. 0.003 %/K (30 ppm/K)
Suitable conditions:	+5 to +40 °C (Storage temperature: -20 to +60 °C), 10 to 90 % RH (non-condensing), maximum height above mean sea level: 2000 m
Housing: Dimensions:	ABS 127 x 83 x 42 mm (LxWxH)
Connecting cable:	2 m, permanently connected
ALMEMO® D6 plug	for measuring channels see Types, Configuration via the ALMEMO® device
Supply voltage:	9 to 12 V via ALMEMO® device
Current consumption:	approx. 85 mA (plug and module)

The digital ALMEMO® D6 measuring module uses its own integrated AD converter. The overall accuracy of the
measurement is independent from the ALMEMO® display unit/ data logger.
The signals are measured at the internal sampling rate of 1 kHz and max, min and average values are calculated from them. The measured value and the calculated values are digitally interrogated by the ALMEMO® measuring instrument at the conversion rate / measuring cycle of the measuring instrument.
The ALMEMO® measuring instrument saves the measured values, and the measuring software WinControl will display them graphically.
The measuring input is overvoltage proof and galvanically isolated from the ALMEMO® measuring device.

Inexpensive monitoring of several DC voltage signals with a large number of measuring modules
Monitoring the charge and discharge processes (current) during the development of rechargeable batteries/batteries for electromobility and for other battery-operated devices.
Monitoring the supply current consumption of DC motors and other consumers.
Checking switches.
Monitoring of the electrical parameters current, addition to the physical measured variables such as temperature, pressure, air flow, flow rate, etc.