No products in the cart.
The Dissolved Oxygen Probe is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.
Learn more about LabQuest 2 »
Product Description
£298.00 ex VAT | £357.60 Inc VAT
Use the Dissolved Oxygen Probe to determine the concentration of oxygen in aqueous solutions in the field or in the laboratory. The Dissolved Oxygen Probe is great for biology, chemistry, ecology, or integrated science courses. It can be used to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment.
Also see our NEW Optical Dissolved Oxygen Probe
Available to Order
Email to a friendExperiments
The Dissolved Oxygen probe can be found in the following Vernier Lab books:-
Investigating Environmental Science through Enquiry
- Investigating Dissolved Oxygen
- Water Quality
- Long Term Water Monitoring
- Biochemical Oxygen Demand
- Primary Productivity
- Interdependence of Plants and Animals
- Aerobic Respiration
- Dissolved Oxygen in Water
- Watershed Testing
- Physical Profile of a Lake
- Primary Productivity
Agricultural Science with Vernier
- Biochemical Oxygen Demand
- Watershed Testing
- Interdependence of Plants and Animals
Investigating Biology through Enquiry
- Investigating Dissolved Oxygen
- Investigating Primary Productivity
- Long Term Water Monitoring
- Dissolved Oxygen in Water
- Primary Productivity
- Dissolved Oxygen
- Biochemical Oxygen Demand
- Physical Profile of a Lake
What's Included
- Vernier Dissolved Oxygen Probe (dissolved oxygen electrode with membrane cap)
- One replacement membrane cap
- Sodium Sulfite Calibration Standard (2.0 M Na2SO3) and MSDS sheet
- D.O. Electrode Filling Solution, MSDS sheet, and filling pipet
- Calibration bottle (empty, lid with hole)
- D.O. Polishing Strips (1 pkg)
- User Manual
Specification
- Range: 0 to 15 mg/L (or ppm)
- Accuracy: ±0.2 mg/L
- Response Time: 95% of final reading in 30 seconds, 98% in 45 seconds
- Resolution: 0.014 mg/L (LabQuest 2, LabQuest, LabQuest Mini, Go!Link, LabPro)
- Temperature Compensation: automatic from 5–35°C
- Pressure Compensation: manual
- Salinity Compensation: manual
- Minimum sample flow: 20 cm/second
Sensor Requirements
The Dissolved Oxygen Probe may require a compatible interface and software. Choose a platform below to see compatible interface and software options.
| Interface | Software | ||
|---|---|---|---|
| Graphical Analysis 4 for Computers | Logger Pro | Logger Lite | |
| LabQuest Mini | Full support | Full support | Full support |
| LabQuest 2 | Full support | Full support | Full support |
| LabQuest Stream | Full support1 | Full support1 | Full support1 |
| Go!Link | Full support | Full support | Full support |
| Original LabQuest (DISCONTINUED) | Full support | Full support | Full support |
| LabPro (DISCONTINUED) | Incompatible | Full support | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
- A computer with a compatible Bluetooth® 4.0 radio is required. Only computers running Windows 10 or Mac OS X 10.10 or newer are supported.
| Interface | Software Graphical Analysis 4 for Chrome |
|---|---|
| LabQuest Mini | Full support |
| LabQuest 2 | Full support |
| LabQuest Stream | Full support1 |
| Go!Link | Full support |
| Original LabQuest (DISCONTINUED) | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
| Software | ||
|---|---|---|
| Interface | Graphical Analysis for iOS | Graphical Analysis for Android |
| LabQuest Stream | Partial Support1 | Partial Support1 |
| LabQuest 2 | Full support2 | Full support2 |
| Go Wireless® Link | Partial Support1 | Partial Support1 |
COMPATIBILITY NOTES
- Data can be collected using the sensor’s default calibration. Future software updates will support calibration modifications.
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
Our Hand-Grip Heart Rate Monitor is ideal for determining a person's heart rate while mobile or stationary. With this sensor, heart rate can be monitored during, or after, exercise. The sensor consists of wireless hand grips and a receiver module that plugs into any of our data-collection devices. The hand grips sense the electrical signals generated by the heart. For each pulse detected, a signal is transmitted to the receiver module, and the individual's pulse rate is calculated. Do you need an interface? Why not go for our Heart Rate Human Physiology Kit?
£155.00 ex VAT | £186.00 Inc VAT Add to basket
The Digital Control Unit (DCU), combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM and engineering projects.
£80.00 ex VAT | £96.00 Inc VAT Add to basket
Use the Dual-Range Force Sensor in a wide variety of experiments including the study of friction, simple harmonic motion, impact in collisions, or centripetal force. The Dual-Range Force Sensor has two ranges: ±10N or ±50N. It can be easily mounted on a Vernier Dynamics Cart for use with the Vernier Dynamics System. Mount one on the New Centripetal Force Apparatus, on a ring stand or even as a replacement for a hand-held spring scale. Use it to study friction, simple harmonic motion, impact in collisions, or centripetal force.
£142.00 ex VAT | £170.40 Inc VAT Add to basket
This is basically three Low-g Accelerometers mounted at right angles and all placed in a small box. Can be used for studying the complex motion of an amusement park ride, a bungee jumper, or simply a toss in the air.
Range: -50 to +50 m/s2
Typical accuracy: ±0.1 m/s2
£129.00 ex VAT | £154.80 Inc VAT Add to basket
The Current Probe can be used to measure currents in low-voltage AC and DC circuits or electrochemistry experiments. The Current Probe measures DC and low-frequency AC currents up to 600 mA.
£51.00 ex VAT | £61.20 Inc VAT Add to basket
The Mini GC Plus is a portable instrument for separating, analyzing, and identifying substances contained in a volatile liquid or gaseous sample. The Mini GC uses Air as its carrier gas so no external gas cylinders required.
£2,720.00 ex VAT | £3,264.00 Inc VAT Add to basket
The Goniometer measures the angle of a joint, such as the knee or elbow. Use it to analyze the range of motion of a limb during different types of physical activity.
£207.00 ex VAT | £248.40 Inc VAT Add to basket
The Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This has many applications in chemistry, biology, and environmental science. The Conductivity Probe has three ranges, providing optimal precision in any given range. Biology teachers can use this probe to demonstrate diffusion of ions through membranes. Chemistry students are able to quickly investigate the difference between ionic and molecular compounds, strong and weak acids, or ionic compounds that yield different ratios of ions. Environmental science students use it to measure TDS, total dissolved solids.
£129.00 ex VAT | £154.80 Inc VAT Add to basket
The Constant Current System is a DC power source with a built-in current probe designed for use in electrochemistry experiments, and as such eliminates the need for a separate power supply when performing electroplating and electrolysis experiments in Chemistry. It is capable of delivering 0.6 A at 5VDC Use the Constant Current System to explore Faraday's law and determine Avogadro's Number. Note: It can only be used in conjunction with its own built-in power supply. It cannot be used to measure the current of a circuit using a different power supply.
£90.00 ex VAT | £108.00 Inc VAT Add to basket
The Flow Rate Sensor can be used for environmental or Earth science studies. Flow rate data can be used to calculate the discharge value for a stream or determine the sediment transport of a stream. The Flow Rate Sensor includes 3 riser rods, which enable the impeller to be placed at fixed depths, and is equipped with a 5 m cable so your data-collection equipment can stay on shore. The Flow Rate Sensor also separates into four sections for easy transport and convenient storage.
£168.00 ex VAT | £201.60 Inc VAT Add to basket
Use the Charge Sensor as an electronic electroscope to obtain quantitative measurements when studying charging by induction, friction, or contact.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The CO2 Gas Sensor measures gaseous carbon dioxide levels in two selectable ranges of 0 to 10,000 ppm and 0 to 100,000 ppm (which covers human breath). Ideal for measuring changes in Carbon Dioxide levels during plant photosynthesis and respiration. You can easily monitor changes in CO2 levels occurring in respiration of organisms as small as crickets or beans! The CO2 Gas Sensor is easily calibrated using a calibration button. A chamber is included for running controlled experiments with small plants and animals. You may also wish to see our O2 Gas Sensor
£350.00 ex VAT | £420.00 Inc VAT Add to basket
The Vernier Optical DO Probe uses luminescent technology to provide fast, easy, and accurate results, making it a terrific choice for biology, ecology, or environmental science courses. Students can measure dissolved oxygen concentration in surface water or to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Using Plug and play technology, no filling solution is required, no warm up time needed, no stirring and no calibration.
£389.00 ex VAT | £466.80 Inc VAT Add to basket
Use the High Current Sensor in experiments that involve currents larger than 1 A, such as solar panels, hand generators, and other alternative energy projects. The High Current Sensor has a range of ±10 A. Current is measured with a Hall Effect sensor, which uses the magnetic field created by the current and therefore does not add a resistive element to the circuit. A metal shield over the Hall Effect chip reduces the influence of external magnets. A replaceable fuse protects the equipment and circuit
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The Differential Voltage Probe is designed for exploring the basic principles of electricity. Use this probe to measure voltages in low voltage AC and DC circuits.
£51.00 ex VAT | £61.20 Inc VAT Add to basket