No products in the cart.
Year WarrantyThe Drop Counter is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.
Learn more about LabQuest 2 »
Product Description
£129.00 ex VAT | £154.80 Inc VAT
Use the Drop Counter to perform accurate, automatic titrations. Record the number of drops or calibrate the drop size to record volume of titrant added during a titration. Logger Pro software can automatically convert the number of drops into volume. The Drop Counter can be used for conductimetric or potentiometric titrations using our Conductivity Probe, Ion-Selective Electrodes or any electrode with a 0 to 5 volt output.
Available to Order
Email to a friendExperiments
The Drop Counter can be found in the following Vernier Lab Books:-
Advanced Chemistry with Vernier
- Standardising a Solution of Sodium Hydroxide
- Acid-Base Titration
- An Oxidation-Reduction Titration: The Reaction of Fe2+ and Ce4+
- Investigating Indicators
- Conductimetric Titration and Gravimetric Determination of a Precipitate
- Potentiometric Titration of Hydrogen Peroxide
- Acid-Base Titration
- Titration of a Diprotic Acid: Identifying an Unknown
- Using Conductivity to Find an Equivalence Point
What's Included
- Vernier Drop Counter
- Plastic reagent reservoir
- Plastic valve with a double stopcock fitting
- Vernier Microstirrer
- User manual
Specification
Sensor Requirements
The Drop Counter may require a compatible interface and software. Choose a platform below to see compatible interface and software options.
| Software | |
|---|---|
| Interface | Logger Pro |
| LabQuest Mini | Full support1 |
| LabQuest 2 | Full support1 |
| LabQuest Stream | Full support12 |
| Original LabQuest (DISCONTINUED) | Full support |
| LabPro (DISCONTINUED) | Full support |
COMPATIBILITY NOTES
- Use with an electrode such as a pH Sensor, Conductivity Probe, or ORP Sensor.
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
| Interface | Software Graphical Analysis for Chrome |
|---|---|
| LabQuest Mini | Future Support1 |
| LabQuest 2 | Full support12 |
| LabQuest Stream | Future support13 |
| Original LabQuest (DISCONTINUED) | Future support1 |
COMPATIBILITY NOTES
- Use with an electrode such as a pH Sensor, Conductivity Probe, or ORP Sensor.
- Full support of this sensor is only available when LabQuest 2 is connected to a Chromebook via Wireless Data Sharing. Future software updates will support the use of this sensor with LabQuest connected via USB to Chromebooks.
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
| Software | ||
|---|---|---|
| Interface | Graphical Analysis for iOS | Graphical Analysis for Android |
| LabQuest Stream | Future support1 | Future support1 |
| LabQuest 2 | Full support12 | Full support12 |
COMPATIBILITY NOTES
- Use with an electrode such as a pH Sensor, Conductivity Probe, or ORP Sensor.
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
Use the Charge Sensor as an electronic electroscope to obtain quantitative measurements when studying charging by induction, friction, or contact.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The Digital Control Unit (DCU), combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM and engineering projects.
£79.00 ex VAT | £94.80 Inc VAT Add to basket
This sensor is used to measure voltages in the range of -30 to +30 volts
£64.00 ex VAT | £76.80 Inc VAT Add to basket
The Current Probe can be used to measure currents in low-voltage AC and DC circuits or electrochemistry experiments. The Current Probe measures DC and low-frequency AC currents up to 600 mA.
£51.00 ex VAT | £61.20 Inc VAT Add to basket
The Vernier Energy Sensor offers an easy way to quantify voltage, current, power, and energy output of small wind turbines and solar panels such as those used in our KidWind Experiment Kits. Simply connect a source such as a small wind turbine or solar panel to one side and a load such as the Variable Load or a resistor on the Vernier Resistor Board to the other side. The Energy Sensor measures the current and voltage of the system. Data-collection and analysis software, such as Logger Pro or LabQuest App can then calculate the power and energy output.
£114.00 ex VAT | £136.80 Inc VAT Add to basket
Use the Ammonium ISE to measure levels of ammonium ions introduced from fertilizers. It can also indicate aqueous ammonia levels if sample solutions are acidified to convert NH3 to NH4+. The Ammonium ISE has a combination-style, non-refillable, gel-filled electrode. Like all other PVC ISE membranes, the membrane on the ISE has a limited life expectancy. However, the replaceable module of ISE allows you to simply discard the used membrane module, and replace it with a new one. Note: We recommend that you do not purchase ISE replacement modules too far in advance of their expected time of use as degradation occurs while they are stored on the shelf.
£259.00 ex VAT | £310.80 Inc VAT Add to basket
Our strain-gauge based isometric Hand Dynamometer can be used to measure grip strength, pinch strength, and to perform muscle fatigue studies. Use the hand dynamometer with other sensors (e.g., EKG Sensor) to study muscular health and activity
£140.00 ex VAT | £168.00 Inc VAT Add to basket
The Anemometer can be used in a variety of experiments to measure wind speed. Can either be used hand held to measure wind speeds, or used with the accessory rod for static experiments such as in front of wind tunnels. The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30 m/s (1 to 67 mph).
£116.00 ex VAT | £139.20 Inc VAT Add to basket
Designed for much higher forces than the Dual-Range Force Sensor, the Force Plate can measure the forces developed during stepping, jumping, and other human-scale actions. For example, you can perform the following kinds of experiments:
£376.00 ex VAT | £451.20 Inc VAT Add to basket- Observe the change in normal force during a ride in a lift.
- Measure the impulse delivered by the floor during a jump.
- Measure the reaction force as a student leans against a wall.
Use the Dissolved Oxygen Probe to determine the concentration of oxygen in aqueous solutions in the field or in the laboratory. The Dissolved Oxygen Probe is great for biology, chemistry, ecology, or integrated science courses. It can be used to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Also see our NEW Optical Dissolved Oxygen Probe
£298.00 ex VAT | £357.60 Inc VAT Add to basket
The Vernier Optical DO Probe uses luminescent technology to provide fast, easy, and accurate results, making it a terrific choice for biology, ecology, or environmental science courses. Students can measure dissolved oxygen concentration in surface water or to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Using Plug and play technology, no filling solution is required, no warm up time needed, no stirring and no calibration.
£389.00 ex VAT | £466.80 Inc VAT Add to basket
This sensor can be used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample.
£155.00 ex VAT | £186.00 Inc VAT Add to basket
The Mini GC Plus is a portable instrument for separating, analyzing, and identifying substances contained in a volatile liquid or gaseous sample. The Mini GC uses Air as its carrier gas so no external gas cylinders required.
£2,719.00 ex VAT | £3,262.80 Inc VAT Add to basket
The Instrumentation Amplifier monitors voltages from 20 mV to 1 V (DC or AC). It has several switch settings to allow you to select the best gain and includes auto-ID functionality for each of the six ranges. Input bandwidth of 10 kHz allows the capture of higher frequency signals. It is typically used to amplify the chart recorder or analog output of any instrument, such as a third-party gas chromatograph.
£103.00 ex VAT | £123.60 Inc VAT Add to basket