No products in the cart.
The Electrode Amplifier is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.
Learn more about LabQuest 2 »
Description
Use an Electrode Amplifier to collect data from almost any electrode that has a BNC connector. This includes electrodes from Vernier such as our pH electrode, or third-party electrodes, such as pH, ISE (ion-selective electrode), or ORP (oxidation-reduction potential).
Specification
- Power: 7 mA @ 5VDC
- Input: range -450 mV to +1100 mV
- Impedance: 100 M
- Gain: 2.2 V/V
- Offset: 1.20 V (nominal)
Sensor Requirements
The Electrode Amplifier may require a compatible interface and software. Choose a platform below to see compatible interface and software options.
| Software | ||
|---|---|---|
| Interface | Logger Pro | Logger Lite |
| LabQuest Mini | Full support1 | Full support1 |
| LabQuest 2 | Full support1 | Full support1 |
| LabQuest Stream | Full support12 | Full support12 |
| Go!Link | Full support1 | Full support1 |
| Go Wireless Link | Future support13 | Future support13 |
| Original LabQuest (DISCONTINUED) | Full support1 | Full support1 |
| LabPro (DISCONTINUED) | Full support1 | Full support1 |
COMPATIBILITY NOTES
- Requires a BNC electrode
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
- A computer with a compatible Bluetooth® 4.0 radio is required. Only computers running Windows 10 or Mac OS X 10.10 or newer are supported.
| Interface | Software Graphical Analysis for Chrome |
|---|---|
| LabQuest Mini | Partial Support12 |
| LabQuest 2 | Full support123 |
| LabQuest Stream | Partial support124 |
| Go!Link | Partial Support12 |
| Original LabQuest (DISCONTINUED) | Partial Support12 |
COMPATIBILITY NOTES
- Requires a BNC electrode
- Data can be collected using the sensor’s default calibration. Future software updates will support calibration modifications.
- Full support of this sensor is only available when LabQuest 2 is connected to a Chromebook via Wireless Data Sharing. Future software updates will support the use of this sensor with LabQuest connected via USB to Chromebooks.
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
| Software | ||
|---|---|---|
| Interface | Graphical Analysis for iOS | Graphical Analysis for Android |
| LabQuest Stream | Future support1 | Future support1 |
| LabQuest 2 | Full support12 | Full support12 |
| Go Wireless Link | Future support1 | Future support1 |
COMPATIBILITY NOTES
- Requires a BNC electrode
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
BNC Electrodes
For our full list of BNC electrodes, please click here.
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
Use the Dissolved Oxygen Probe to determine the concentration of oxygen in aqueous solutions in the field or in the laboratory. The Dissolved Oxygen Probe is great for biology, chemistry, ecology, or integrated science courses. It can be used to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Also see our NEW Optical Dissolved Oxygen Probe
£298.00 ex VAT | £357.60 Inc VAT Add to basket
The Instrumentation Amplifier monitors voltages from 20 mV to 1 V (DC or AC). It has several switch settings to allow you to select the best gain and includes auto-ID functionality for each of the six ranges. Input bandwidth of 10 kHz allows the capture of higher frequency signals. It is typically used to amplify the chart recorder or analog output of any instrument, such as a third-party gas chromatograph.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The Flow Rate Sensor can be used for environmental or Earth science studies. Flow rate data can be used to calculate the discharge value for a stream or determine the sediment transport of a stream. The Flow Rate Sensor includes 3 riser rods, which enable the impeller to be placed at fixed depths, and is equipped with a 5 m cable so your data-collection equipment can stay on shore. The Flow Rate Sensor also separates into four sections for easy transport and convenient storage.
£168.00 ex VAT | £201.60 Inc VAT Add to basket
The Vernier Go Wireless Heart Rate is ideal for continuously monitoring heart rate before, during, and after exercise or while a person is stationary. Data are wirelessly transmitted to iPad, LabQuest 2, or other mobile devices that are Bluetooth® Smart Ready. It is simple and easy to use, displays live heart rate readouts before data collection, and is easy to clean and share between students.
£116.00 ex VAT | £139.20 Inc VAT Add to basket
Use the Drop Counter to perform accurate, automatic titrations. Record the number of drops or calibrate the drop size to record volume of titrant added during a titration. Logger Pro software can automatically convert the number of drops into volume. The Drop Counter can be used for conductimetric or potentiometric titrations using our Conductivity Probe, Ion-Selective Electrodes or any electrode with a 0 to 5 volt output.
£129.00 ex VAT | £154.80 Inc VAT Add to basket
Use the High Current Sensor in experiments that involve currents larger than 1 A, such as solar panels, hand generators, and other alternative energy projects. The High Current Sensor has a range of ±10 A. Current is measured with a Hall Effect sensor, which uses the magnetic field created by the current and therefore does not add a resistive element to the circuit. A metal shield over the Hall Effect chip reduces the influence of external magnets. A replaceable fuse protects the equipment and circuit
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The Barometer can be used to measure and monitor atmospheric pressure. It works well for conducting weather studies or experiments that involve pressures close to normal atmospheric pressure. It can also be used as an altimeter if you have a portable interface.
£93.00 ex VAT | £111.60 Inc VAT Add to basket
This sensor can be used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample.
£155.00 ex VAT | £186.00 Inc VAT Add to basket
Ideal for most acceleration experiments. Use it for studying the one-dimensional motion of a car (real and toy), lift, pendulum bob, or amusement park ride.
£116.00 ex VAT | £139.20 Inc VAT Add to basket- Range: -50 to +50 m/s2
- Typical accuracy: ±0.1 m/s
The Vernier Optical DO Probe uses luminescent technology to provide fast, easy, and accurate results, making it a terrific choice for biology, ecology, or environmental science courses. Students can measure dissolved oxygen concentration in surface water or to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Using Plug and play technology, no filling solution is required, no warm up time needed, no stirring and no calibration.
£389.00 ex VAT | £466.80 Inc VAT Add to basket
The CO2 Gas Sensor measures gaseous carbon dioxide levels in two selectable ranges of 0 to 10,000 ppm and 0 to 100,000 ppm (which covers human breath). Ideal for measuring changes in Carbon Dioxide levels during plant photosynthesis and respiration. You can easily monitor changes in CO2 levels occurring in respiration of organisms as small as crickets or beans! The CO2 Gas Sensor is easily calibrated using a calibration button. A chamber is included for running controlled experiments with small plants and animals. You may also wish to see our O2 Gas Sensor
£350.00 ex VAT | £420.00 Inc VAT Add to basket
The Digital Control Unit (DCU), combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM and engineering projects.
£80.00 ex VAT | £96.00 Inc VAT Add to basket
Use the Charge Sensor as an electronic electroscope to obtain quantitative measurements when studying charging by induction, friction, or contact.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The EKG Sensor measures electrical signals produced during muscle contractions, and can be used to make standard 3-lead EKG tracings or surface EMG recordings. The EKG Sensor measures electrical signals produced by the heart. It uses three disposable electrodes. An EKG graph is displayed, demonstrating to students the contraction and repolarization of the heart's chambers. A package of 100 disposable electrodes is included with the sensor.
£206.00 ex VAT | £247.20 Inc VAT Add to basket
The Anemometer can be used in a variety of experiments to measure wind speed. Can either be used hand held to measure wind speeds, or used with the accessory rod for static experiments such as in front of wind tunnels. The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30 m/s (1 to 67 mph).
£116.00 ex VAT | £139.20 Inc VAT Add to basket