Year WarrantyThe Vernier Energy Sensor is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.
Learn more about LabQuest 2 »
Product Description
£114.00 ex VAT | £136.80 Inc VAT
The Vernier Energy Sensor offers an easy way to quantify voltage, current, power, and energy output of small wind turbines and solar panels such as those used in our KidWind Experiment Kits. Simply connect a source such as a small wind turbine or solar panel to one side and a load such as the Variable Load or a resistor on the Vernier Resistor Board to the other side.
The Energy Sensor measures the current and voltage of the system. Data-collection and analysis software, such as Logger Pro or LabQuest App can then calculate the power and energy output.
In stock
Email to a friendExperiments
The Vernier Energy Sensor can be found in the following Lab Books:-
- Voltage and Circuits
- Current and Resistors
- Generators
- Exploring Wind Turbines
- Effect of Load on Wind Turbine Output
- Blade Variables and Power Output
- Solidity
- Turbine Efficiency
- Power Curves
- Power and Energy
- Project: Maximum Energy Output
- Project: Build a Wind Farm
- Exploring Solar Panels
- Effect of Load on Solar Panel Output
- Variables Affecting Solar Panel Output
- Effect of Temperature on Solar Panel Output
- Project: Build a Solar Charger
- Wind Turbine Output: The Effect of Load
- Exploring Wind Turbine Blades
- Blade Design: Pitch
- Blade Design: Area
- Blade Design: Quantity
- Blade Design: MassBlade Design: Material
- Project: Power Up!
Specification
- Source Input Potential Range: ± 30 V
- Source Input Current Range: ± 1000 mA
Sensor Requirements
The Vernier Energy Sensor may require a compatible interface and software. Choose a platform below to see compatible interface and software options.
| Software | ||
|---|---|---|
| Interface | Logger Pro | Logger Lite |
| LabQuest Mini | Full support | Full support |
| LabQuest 2 | Full support | Full support |
| LabQuest Stream | Full support1 | Full support1 |
| Go!Link | Partial support2 | Partial support2 |
| Go Wireless® Link | Future support2 3 | Future support2 3 |
| Original LabQuest (DISCONTINUED) | Full support | Full support |
| LabPro (DISCONTINUED) | Full support | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
- This interface can collect voltage data or current data but not both simultaneously. Software cannot calculate resistance and power data.
- A computer with a compatible Bluetooth® 4.0 radio is required. Only computers running Windows 10 or Mac OS X 10.10 or newer are supported.
| Interface | Software Graphical Analysis for Chrome |
|---|---|
| LabQuest Mini | Partial support1 |
| LabQuest 2 | Full support12 |
| LabQuest Stream | Partial support13 |
| Go!Link | Partial Support4 |
| Original LabQuest (DISCONTINUED) | Partial Support1 |
COMPATIBILITY NOTES
- Software cannot calculate resistance or power data.
- Full support of this sensor is only available when LabQuest 2 is connected to a Chromebook via Wireless Data Sharing. Future software updates will support the use of this sensor with LabQuest connected via USB to Chromebooks.
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
- This interface can collect voltage data or current data but not both simultaneously. Software cannot calculate resistance and power data.
| Software | ||
|---|---|---|
| Interface | Graphical Analysis for iOS | Graphical Analysis for Android |
| LabQuest Stream | Partial Support1 | Partial Support1 |
| LabQuest 2 | Full support2 | Full support2 |
| Go Wireless® Link | Partial Support3 | Partial Support3 |
COMPATIBILITY NOTES
- Software cannot calculate resistance or power data.
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
- This interface can collect voltage data or current data but not both simultaneously. Software cannot calculate resistance and power data.
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
The Instrumentation Amplifier monitors voltages from 20 mV to 1 V (DC or AC). It has several switch settings to allow you to select the best gain and includes auto-ID functionality for each of the six ranges. Input bandwidth of 10 kHz allows the capture of higher frequency signals. It is typically used to amplify the chart recorder or analog output of any instrument, such as a third-party gas chromatograph.
£103.00 ex VAT | £123.60 Inc VAT
Add to basket 
Use the Dual-Range Force Sensor in a wide variety of experiments including the study of friction, simple harmonic motion, impact in collisions, or centripetal force. The Dual-Range Force Sensor has two ranges: ±10N or ±50N. It can be easily mounted on a Vernier Dynamics Cart for use with the Vernier Dynamics System. Mount one on the New Centripetal Force Apparatus, on a ring stand or even as a replacement for a hand-held spring scale.
Use it to study friction, simple harmonic motion, impact in collisions, or centripetal force.
£142.00 ex VAT | £170.40 Inc VAT
Add to basket 
The Vernier Optical DO Probe uses luminescent technology to provide fast, easy, and accurate results, making it a terrific choice for biology, ecology, or environmental science courses. Students can measure dissolved oxygen concentration in surface water or to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment.
Using Plug and play technology, no filling solution is required, no warm up time needed, no stirring and no calibration.
£389.00 ex VAT | £466.80 Inc VAT
Add to basket 
This is great for studying one-dimensional collisions or any motion with larger accelerations.
£120.00 ex VAT | £144.00 Inc VAT
Add to basket - Range: -250 to +250 m/s2
- Typical accuracy: ±1 m/s2
This sensor is used to measure voltages in the range of -30 to +30 volts
£64.00 ex VAT | £76.80 Inc VAT
Add to basket 
The Anemometer can be used in a variety of experiments to measure wind speed. Can either be used hand held to measure wind speeds, or used with the accessory rod for static experiments such as in front of wind tunnels. The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30 m/s (1 to 67 mph).
£116.00 ex VAT | £139.20 Inc VAT
Add to basket 
The EKG Sensor measures electrical signals produced during muscle contractions, and can be used to make standard 3-lead EKG tracings or surface EMG recordings.
The EKG Sensor measures electrical signals produced by the heart. It uses three disposable electrodes. An EKG graph is displayed, demonstrating to students the contraction and repolarization of the heart's chambers. A package of 100 disposable electrodes is included with the sensor.
£200.00 ex VAT | £240.00 Inc VAT
Add to basket 
Use the High Current Sensor in experiments that involve currents larger than 1 A, such as solar panels, hand generators, and other alternative energy projects.
The High Current Sensor has a range of ±10 A. Current is measured with a Hall Effect sensor, which uses the magnetic field created by the current and therefore does not add a resistive element to the circuit. A metal shield over the Hall Effect chip reduces the influence of external magnets. A replaceable fuse protects the equipment and circuit
£103.00 ex VAT | £123.60 Inc VAT
Add to basket 
The Vernier Go Wireless Heart Rate is ideal for continuously monitoring heart rate before, during, and after exercise or while a person is stationary. Data are wirelessly transmitted to iPad, LabQuest 2, or other mobile devices that are Bluetooth® Smart Ready. It is simple and easy to use, displays live heart rate readouts before data collection, and is easy to clean and share between students.
£116.00 ex VAT | £139.20 Inc VAT
Add to basket 
The Goniometer measures the angle of a joint, such as the knee or elbow. Use it to analyze the range of motion of a limb during different types of physical activity.
£207.00 ex VAT | £248.40 Inc VAT
Add to basket 
Our strain-gauge based isometric Hand Dynamometer can be used to measure grip strength, pinch strength, and to perform muscle fatigue studies. Use the hand dynamometer with other sensors (e.g., EKG Sensor) to study muscular health and activity
£140.00 ex VAT | £168.00 Inc VAT
Add to basket 
The CO2 Gas Sensor measures gaseous carbon dioxide levels in two selectable ranges of 0 to 10,000 ppm and 0 to 100,000 ppm (which covers human breath).
Ideal for measuring changes in Carbon Dioxide levels during plant photosynthesis and respiration. You can easily monitor changes in CO2 levels occurring in respiration of organisms as small as crickets or beans! The CO2 Gas Sensor is easily calibrated using a calibration button. A chamber is included for running controlled experiments with small plants and animals.
You may also wish to see our O2 Gas Sensor
£350.00 ex VAT | £420.00 Inc VAT
Add to basket 
The Colorimeter is great for Beer's law experiments, determining the concentration of unknown solutions, or studying changes in concentration vs. time.
This 4-wavelength Colorimeter measures the amount of light transmitted through a sample at a user-selectable wavelength in order to determine the concentration of a solution. Features such as automatic sensor identification and one-step calibration make this sensor easy to use. Fifteen 3.5 mL cuvettes are included. A package of 100 replacement cuvettes (with 20 lids) is available please click here
£155.00 ex VAT | £186.00 Inc VAT
Add to basket 
The Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This has many applications in chemistry, biology, and environmental science.
The Conductivity Probe has three ranges, providing optimal precision in any given range. Biology teachers can use this probe to demonstrate diffusion of ions through membranes. Chemistry students are able to quickly investigate the difference between ionic and molecular compounds, strong and weak acids, or ionic compounds that yield different ratios of ions. Environmental science students use it to measure TDS, total dissolved solids.
£129.00 ex VAT | £154.80 Inc VAT
Add to basket