No products in the cart.
Year Warranty| Interface | LabQuest App |
|---|---|
| Full Support | |
LabQuest 2 (Discontinued) | Full Support |
| Labquest 1 (discontinued) | Full Support |
Product Description
£129.00 ex VAT | £154.80 Inc VAT
This probe is designed for outdoor temperature sensing or for measuring temperature at various depths in lakes and streams. It has a 30 m (100 ft) cable.
Available to Order
Email to a friendExperiments
The Extra Long Temperature Probe can be found in the following Vernier Lab Books:-
- Physical Profile of a Lake
- Physical Profile of a Lake
Specification
- Measurement Range: -50 to 150°C
- Resolution (LabQuest, LabQuest Mini, Go!Link, LabPro): 0.07°C
- Temperature Sensor: 20 kΩ NTC Thermistor
- Accuracy: ±0.2°C
- Response time (time for 90% change in reading): In water with stirring 8 to 10 seconds, In water without stirring 45 seconds, Moving air: 100 seconds
- Power: 7.4 mA @ 5 VDC
Requirements
Choose a platform below to see compatible interface and software options.
| Interface | Software | ||
|---|---|---|---|
| Graphical Analysis for Computers Version 5.4 | Logger Pro Version 3.16 | Logger Lite Verison 1.9.4 | |
| LabQuest Mini | Full support | Full support | Full support |
| LabQuest 3 | Full support | Full support | Full support |
| LabQuest 2 (Discontinued) | Full support | Full support | Full support |
| LabQuest Stream | Full support1 | Full support | Full support1 |
| Go!Link | Full support | Full support | Full support |
| Original LabQuest (Discontinued) | Full support | Full support | Full support |
| LabPro (Discontinued) | Incompatible | Full support | Full support |
COMPATIBILITY NOTES
1. Connect LabQuest Stream via USB. Wireless connection is not supported.
| Interface | Software |
|---|---|
| Graphical Analysis for Chrome Version 5.4 | |
| LabQuest Mini | Full support |
| LabQuest 3 | Full support |
| LabQuest 2 (Discontinued) | Full support |
| LabQuest Stream | Full support1 3 |
| Go!Link | Full support |
| Original LabQuest (Discontinued) | Full support |
COMPATIBILITY NOTES
1. Connect LabQuest Stream via USB. Wireless connection is not supported.
| Interface | Software | |
|---|---|---|
| Graphical Analysis App for iOS Version 5.4 | Graphical Analysis GW Verison 4.0.6 | |
| LabQuest Stream | Full support | Full support |
| LabQuest 3 | Full support 1 | Full support 1 |
| LabQuest 2 (Discontinued) | Full support 1 | Full support 1 |
COMPATIBILITY NOTES
1.Mobile devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
| Interface | Software | |
|---|---|---|
| Graphical Analysis App for Android Version 5.4 | Graphical Analysis GW Verison 3.2 | |
| LabQuest Stream | Full support | Full support |
| LabQuest 3 | Full support 1 | Full support 1 |
| LabQuest 2 (Discontinued) | Full support 1 | Full support 1 |
COMPATIBILITY NOTES
1.Mobile devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
The Differential Voltage Probe is designed for exploring the basic principles of electricity. Use this probe to measure voltages in low voltage AC and DC circuits.
£51.00 ex VAT | £61.20 Inc VAT Add to basket
The Digital Control Unit (DCU), combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM and engineering projects.
£80.00 ex VAT | £96.00 Inc VAT Add to basket
Our Hand-Grip Heart Rate Monitor is ideal for determining a person's heart rate while mobile or stationary. With this sensor, heart rate can be monitored during, or after, exercise. The sensor consists of wireless hand grips and a receiver module that plugs into any of our data-collection devices. The hand grips sense the electrical signals generated by the heart. For each pulse detected, a signal is transmitted to the receiver module, and the individual's pulse rate is calculated. Do you need an interface? Why not go for our Heart Rate Human Physiology Kit?
£155.00 ex VAT | £186.00 Inc VAT Add to basket
This sensor is used to measure voltages in the range of -30 to +30 volts
£64.00 ex VAT | £76.80 Inc VAT Add to basket
The Barometer can be used to measure and monitor atmospheric pressure. It works well for conducting weather studies or experiments that involve pressures close to normal atmospheric pressure. It can also be used as an altimeter if you have a portable interface.
£93.00 ex VAT | £111.60 Inc VAT Add to basket
The Anemometer can be used in a variety of experiments to measure wind speed. Can either be used hand held to measure wind speeds, or used with the accessory rod for static experiments such as in front of wind tunnels. The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30 m/s (1 to 67 mph).
£116.00 ex VAT | £139.20 Inc VAT Add to basket
Designed for much higher forces than the Dual-Range Force Sensor, the Force Plate can measure the forces developed during stepping, jumping, and other human-scale actions. For example, you can perform the following kinds of experiments:
£376.00 ex VAT | £451.20 Inc VAT Add to basket- Observe the change in normal force during a ride in a lift.
- Measure the impulse delivered by the floor during a jump.
- Measure the reaction force as a student leans against a wall.
Use the Ammonium ISE to measure levels of ammonium ions introduced from fertilizers. It can also indicate aqueous ammonia levels if sample solutions are acidified to convert NH3 to NH4+. The Ammonium ISE has a combination-style, non-refillable, gel-filled electrode. Like all other PVC ISE membranes, the membrane on the ISE has a limited life expectancy. However, the replaceable module of ISE allows you to simply discard the used membrane module, and replace it with a new one. Note: We recommend that you do not purchase ISE replacement modules too far in advance of their expected time of use as degradation occurs while they are stored on the shelf.
£285.00 ex VAT | £342.00 Inc VAT Add to basket
The Vernier Go Wireless Exercise Heart Rate is an excellent hands-free option for continuously monitoring heart rate before, during, and after exercise or while a person is stationary. Using the chest strap, data are wirelessly transmitted to iPad, LabQuest 2, or other mobile devices that are Bluetooth® Smart Ready. It displays live heart readouts before data collection,and is ideal for running, cycling and other physical activities. For an option to monitor heart rate with hands, please consider the Go Wireless Heart Rate.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
This sensor can be used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample.
£155.00 ex VAT | £186.00 Inc VAT Add to basket
The Vernier Energy Sensor offers an easy way to quantify voltage, current, power, and energy output of small wind turbines and solar panels such as those used in our KidWind Experiment Kits. Simply connect a source such as a small wind turbine or solar panel to one side and a load such as the Variable Load or a resistor on the Vernier Resistor Board to the other side. The Energy Sensor measures the current and voltage of the system. Data-collection and analysis software, such as Logger Pro or LabQuest App can then calculate the power and energy output.
£115.00 ex VAT | £138.00 Inc VAT Add to basket
Use the High Current Sensor in experiments that involve currents larger than 1 A, such as solar panels, hand generators, and other alternative energy projects. The High Current Sensor has a range of ±10 A. Current is measured with a Hall Effect sensor, which uses the magnetic field created by the current and therefore does not add a resistive element to the circuit. A metal shield over the Hall Effect chip reduces the influence of external magnets. A replaceable fuse protects the equipment and circuit
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The Vernier Optical DO Probe uses luminescent technology to provide fast, easy, and accurate results, making it a terrific choice for biology, ecology, or environmental science courses. Students can measure dissolved oxygen concentration in surface water or to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Using Plug and play technology, no filling solution is required, no warm up time needed, no stirring and no calibration.
£389.00 ex VAT | £466.80 Inc VAT Add to basket
The Polarimeter can be used to measure chiral properties of optically active samples without chemically modifying or destroying the sample. This is a vertical polarimeter that uses a 589 nm LED, a fixed polarizer, and a manually rotated polarizer to detect changes in rotation of plane-polarized light in the presence of an optically active compound. Used with Vernier technology, students no longer have to determine the optical maximum with their eye but have a graph that shows a clear change in the light's polarization.
£649.00 ex VAT | £778.80 Inc VAT Add to basket
Ideal for most acceleration experiments. Use it for studying the one-dimensional motion of a car (real and toy), lift, pendulum bob, or amusement park ride.
£116.00 ex VAT | £139.20 Inc VAT Add to basket- Range: -50 to +50 m/s2
- Typical accuracy: ±0.1 m/s