£996.00 ex VAT | £1,195.20 Inc VAT
Digital overpressure sensor 0 to 100 bar, with a plug connector and a 2 meter cable with a ALMEMO® D6 plug. Resolution of 0.01 bar with an overload pressure of 200 bar. The diaphragm of this sensor is flush with front. Comes with manufactures test certificate.
Available to Order
Email to a friendTechnical Specification
DIGITAL PRESSURE SENSOR (INCLUDING A/D CONVERTER) | |
---|---|
Pressure range | 1 to 1000 bar. See under variants |
Relative pressure | Zero-point at ambient atmospheric pressure, current |
Overpressure | Zero-point at ambient atmosph. pressure, production |
Absolute pressure | Zero-point, vacuum |
Pressure connection | |
FDAD33 | Outside thread G ¼" Diaphragm, internal |
FDAD35M | Diaphragm, flush with front Outside thread G ½" In pressure range 700/1000 bar Outside thread G ¾" |
Storage / operating temperature | -40 to +120 °C |
Accuracy Error margin* at -10 to +40°C 0.05 % of final value Error margin* at +41 to +80°C 0.1 % of final value *Linearity, hysteresis, reproducibility, temperature coefficients, zero-point | |
Sampling rate, internal S | 200 Hz |
Material in contact with medium | Stainless steel, AISI 316L, Viton |
Protection | IP65 |
Dimensions | Please see dimensional drawings |
Sensor connector | Built-in plug |
ALMEMO® connecting cable | Coupling, 2-meter PVC cable, ALMEMO® D6 plug |
ALMEMO® D6 CONNECTOR | |
Refresh time | 0.005 seconds for all channels |
Setting time | 0.6 seconds |
Delay after sleep mode | 1 second |
Supply voltage | 8 to 13 VDC |
Current consumption | approx. 11 mA |
FDAD33/35 Technical Features
- Stable piezo-resistive transducer with integrated A/D converter and signal processor
- Temperature-dependence and non-linearity are eliminated by means of mathematical compensation; this ensures a high level of accuracy.
- Digital output of measured value
- The current value is measured at the sensor’s high sampling rate.
- To acquire transitory pressure fluctuations and pressure peaks the maximum value, minimum value, and average value are calculated from the current values in the ALMEMO® D6 plug and output in three function channels.
- One measuring channel is programmed (at Ahlborn’s Factory):Pressure (bar,p) Up to three function channels can also be activated (via ALMEMO® device V6) : Maximum value, minimum value, average value. A complete configuration can be carried out either on the ALMEMO® V7 measuring instrument or directly on the PC with the USB adapter cable ZA 1919 AKUV.