£284.00 – £379.00
Sensor for flow rate and temperature over a measured section, including ALMEMO® connecting cable, 2.9 meters
Technical Specification
Flow | |
Measuring principle | Pressure pulsation Kármán vortex street |
Measuring range | see variants |
Accuracy | using water as medium at 0 to +100°C ±1.5 % of final value |
Resolution FVA645GV18QT5 FVA645GV40QT5 FVA645GV100QT5 FVA645GV200QT5 | 0.01 l/min 0.01 l/min 0.1 l/min 0.1 l/min |
Reaction time (63 %) | < 3 s |
Temperature | |
Measuring range | 0 to +100 °C |
Accuracy | ±1 K at +15 to +90 °C ±2 K at 0 to +100 °C |
Resolution | 0.1 K |
Reaction time (63 %) | <0,25 second under flow conditions 50% of final value |
Process Connection FVA645GV18QT5 FVA645GV40QT5 FVA645GV100QT5 FVA645GV200QT5 | 2x male thread G 3/4“ male thread G 3/4“ male thread G 1“ male thread G 1 1/4“ male thread |
Pressure | 10 bar |
Pressure loss | 0.1 bar, typical under flow conditions, 50 % of final value |
Suitable Conditions | |
Media | Water, Viscosity < 2 mm²/s) and conductivity >2μS/cm |
Temp. of medium | 0 to +100 °C |
Ambient temperature | -25 to +60 °C |
Ambient humidity | up to 95 % RH, non-condensing |
Electrical Connections | |
Output signal | 2x 0.5 to 3.5 V (4.1 V) |
Power supply | 5 VDC (±5 %), <10 mA via ALMEMO® connector |
Connection | Sensor with 2.9-meter connecting cable and ALMEMO® connector |
Fitting length FVA645GV18QT5 FVA645GV40QT5 FVA645GV100QT5 FVA645GV200QT5 | ca. 110 mm ca. 110 mm ca. 129 mm ca. 137.5 mm |
Materials (in contact with media) | Corrosion-resistant coating EPDM, PPS, PPA 40-GF |
Pipe piece | Stainless steel 1.4408; (inside pipe PPA 40-GF) |
Technical Features
- Measuring section in stainless steel
- Application in systems with laminar flow, no pressure surges, no air pockets, no suspended solids
- Without any moving parts
- Integrated temperature measuring
- Low pressure loss
- Wide temperature range
- High-speed reaction time
- Using with water
- For heat output measurement in heating systems and cooling plant