No products in the cart.
Year WarrantyThe Gas Pressure Sensor is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.
Learn more about LabQuest 2 »
Product Description
£116.00 ex VAT | £139.20 Inc VAT
The Gas Pressure Sensor can be used to monitor pressure changes in a gas. The range is wide enough to perform Boyle’s law yet it is sensitive enough to conduct vapor-pressure or pressure-temperature experiments. Biology teachers can use the Gas Pressure Sensor to monitor transpiration or respiration in an enclosed environment.
Available to Order
Experiments
The Gas Pressure Sensor can be found in the following Vernier Lab Books :-
- Enzyme Action: Testing Catalase Activity
- Transpiration
- Cell Respiration (Pressure)
- Sugar Fermentation
- Effect of Temperature on Fermentation
- Osmosis
- Lactase Action
- Control of Human Respiration
Investigating Chemistry through Enquiry
- Vapor Pressure and Heat of Vaporisation Investigations
- Baking Soda and Vinegar Investigations Revisited
- Reaction Rates
- Enzyme Activity
- Sugar Fermentation by Yeast
Advanced Chemistry with Vernier
- The Molar Mass of a Volatile Liquid
- The Molar Volume of a Gas
- The Decomposition of Hydrogen Peroxide
- Exploring the Properties of Gases
- Vapor Pressure and Heat of Vaporisation
Investigating Biology Through Enquiry
- Investigating Osmosis
- Testing Catalase Activity (Gas Pressure)
- Fermentation with Yeast
- Transpiration of Plants
- Osmosis
- Enzyme Action: Testing Catalase Activity
- Cell Respiration Pressure
- Transpiration
Agricultural Science with Vernier
- Osmosis
- Transpiration
- Enzyme Action: Testing Catalase
- Lactase Action
- Boyle’s Law: Pressure-Volume Relationship in Gases
- Pressure-Temperature Relationship in Gases
- Vapor Pressure of Liquids
Advanced Physics – Beyond Mechanics
- Behavior of a Gas
- Heat Engines
Elementary Science with Vernier
- Learning to Use the Pressure Sensor
- Get a Grip!
- Under Pressure
- Bubbles in Your Bread
Middle School Science with Vernier
- Get a Grip!
- Fun with Pressure
- Yeast Beasts in Action
Vernier Engineering Projects with LEGO® MINDSTORMS® Education NXT
- Cartesian Diver
What's Included
- Vernier Gas Pressure Sensor
- (2) tapered valve connectors inserted into a No. 5 stopper
- (1) tapered valve connector inserted into a No. 1 stopper
- (1) two-way valve
- (1) 18 inch Tygon tubing with Luer Lock connectors
- (1) 20 mL syringe
- (2) transpiration tubing clamps (white)
- User manual
Specification
- Pressure Range: 0 to 210 kPa (0 to 2.1 atm or 0 to 1600 mm Hg)
- Maximum pressure that the sensor can tolerate without permanent damage: 4 atm
- Resolution: 0.05 kPa (0.0005 atm or 0.40 mm Hg). (LabQuest, LabQuest Mini, Go!Link, LabPro)
- Sensing Element: SenSym SDX30A4
- Combined Linearity and Hysteresis: typical ±0.2% full scale
- Response Time: 100 microseconds
Sensor Requirements
The Gas Pressure Sensor may require a compatible interface and software. Choose a platform below to see compatible interface and software options.
| Interface | Software | ||
|---|---|---|---|
| Graphical Analysis 4 for Computers | Logger Pro | Logger Lite | |
| LabQuest Mini | Full support | Full support | Full support |
| LabQuest 2 | Full support | Full support | Full support |
| LabQuest Stream | Full support1 | Full support1 | Full support1 |
| Go!Link | Full support | Full support | Full support |
| Original LabQuest (DISCONTINUED) | Full support | Full support | Full support |
| LabPro (DISCONTINUED) | Incompatible | Full support | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
- A computer with a compatible Bluetooth® 4.0 radio is required. Only computers running Windows 10 or Mac OS X 10.10 or newer are supported.
| Interface | Software Graphical Analysis 4 for Chrome |
|---|---|
| LabQuest Mini | Full support |
| LabQuest 2 | Full support |
| LabQuest Stream | Full support1 |
| Go!Link | Full support |
| Original LabQuest (DISCONTINUED) | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
| Interface | Software | |
|---|---|---|
| Graphical Analysis 4 | Graphical Analysis GW | |
| LabQuest Stream | Full support | Full support |
| LabQuest 2 | Full support1 | Full support1 |
| Go Wireless® Link (DISCONTINUED) | Incompatible | Full support |
COMPATIBILITY NOTES
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
Accessories
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
Use the High Current Sensor in experiments that involve currents larger than 1 A, such as solar panels, hand generators, and other alternative energy projects. The High Current Sensor has a range of ±10 A. Current is measured with a Hall Effect sensor, which uses the magnetic field created by the current and therefore does not add a resistive element to the circuit. A metal shield over the Hall Effect chip reduces the influence of external magnets. A replaceable fuse protects the equipment and circuit
£103.00 ex VAT | £123.60 Inc VAT Add to basket
Use the Charge Sensor as an electronic electroscope to obtain quantitative measurements when studying charging by induction, friction, or contact.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
Our Hand-Grip Heart Rate Monitor is ideal for determining a person's heart rate while mobile or stationary. With this sensor, heart rate can be monitored during, or after, exercise. The sensor consists of wireless hand grips and a receiver module that plugs into any of our data-collection devices. The hand grips sense the electrical signals generated by the heart. For each pulse detected, a signal is transmitted to the receiver module, and the individual's pulse rate is calculated. Do you need an interface? Why not go for our Heart Rate Human Physiology Kit?
£155.00 ex VAT | £186.00 Inc VAT Add to basket
Use the Dual-Range Force Sensor in a wide variety of experiments including the study of friction, simple harmonic motion, impact in collisions, or centripetal force. The Dual-Range Force Sensor has two ranges: ±10N or ±50N. It can be easily mounted on a Vernier Dynamics Cart for use with the Vernier Dynamics System. Mount one on the New Centripetal Force Apparatus, on a ring stand or even as a replacement for a hand-held spring scale. Use it to study friction, simple harmonic motion, impact in collisions, or centripetal force.
£142.00 ex VAT | £170.40 Inc VAT Add to basket
Designed for much higher forces than the Dual-Range Force Sensor, the Force Plate can measure the forces developed during stepping, jumping, and other human-scale actions. For example, you can perform the following kinds of experiments:
£376.00 ex VAT | £451.20 Inc VAT Add to basket- Observe the change in normal force during a ride in a lift.
- Measure the impulse delivered by the floor during a jump.
- Measure the reaction force as a student leans against a wall.
The Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This has many applications in chemistry, biology, and environmental science. The Conductivity Probe has three ranges, providing optimal precision in any given range. Biology teachers can use this probe to demonstrate diffusion of ions through membranes. Chemistry students are able to quickly investigate the difference between ionic and molecular compounds, strong and weak acids, or ionic compounds that yield different ratios of ions. Environmental science students use it to measure TDS, total dissolved solids.
£129.00 ex VAT | £154.80 Inc VAT Add to basket
Use the Dissolved Oxygen Probe to determine the concentration of oxygen in aqueous solutions in the field or in the laboratory. The Dissolved Oxygen Probe is great for biology, chemistry, ecology, or integrated science courses. It can be used to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Also see our NEW Optical Dissolved Oxygen Probe
£298.00 ex VAT | £357.60 Inc VAT Add to basket
This is a non-invasive sensor designed to measure human blood pressure. It measures systolic, diastolic and mean arterial pressure utilizing the oscillometric technique. Pulse rate is also reported.
£142.00 ex VAT | £170.40 Inc VAT Add to basket
This is basically three Low-g Accelerometers mounted at right angles and all placed in a small box. Can be used for studying the complex motion of an amusement park ride, a bungee jumper, or simply a toss in the air.
Range: -50 to +50 m/s2
Typical accuracy: ±0.1 m/s2
£129.00 ex VAT | £154.80 Inc VAT Add to basket
The Vernier Optical DO Probe uses luminescent technology to provide fast, easy, and accurate results, making it a terrific choice for biology, ecology, or environmental science courses. Students can measure dissolved oxygen concentration in surface water or to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Using Plug and play technology, no filling solution is required, no warm up time needed, no stirring and no calibration.
£389.00 ex VAT | £466.80 Inc VAT Add to basket
The Digital Control Unit (DCU), combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM and engineering projects.
£80.00 ex VAT | £96.00 Inc VAT Add to basket
This sensor can be used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample.
£155.00 ex VAT | £186.00 Inc VAT Add to basket
The Instrumentation Amplifier monitors voltages from 20 mV to 1 V (DC or AC). It has several switch settings to allow you to select the best gain and includes auto-ID functionality for each of the six ranges. Input bandwidth of 10 kHz allows the capture of higher frequency signals. It is typically used to amplify the chart recorder or analog output of any instrument, such as a third-party gas chromatograph.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The Constant Current System is a DC power source with a built-in current probe designed for use in electrochemistry experiments, and as such eliminates the need for a separate power supply when performing electroplating and electrolysis experiments in Chemistry. It is capable of delivering 0.6 A at 5VDC Use the Constant Current System to explore Faraday's law and determine Avogadro's Number. Note: It can only be used in conjunction with its own built-in power supply. It cannot be used to measure the current of a circuit using a different power supply.
£90.00 ex VAT | £108.00 Inc VAT Add to basket
The Colorimeter is great for Beer's law experiments, determining the concentration of unknown solutions, or studying changes in concentration vs. time. This 4-wavelength Colorimeter measures the amount of light transmitted through a sample at a user-selectable wavelength in order to determine the concentration of a solution. Features such as automatic sensor identification and one-step calibration make this sensor easy to use. Fifteen 3.5 mL cuvettes are included. A package of 100 replacement cuvettes (with 20 lids) is available please click here
£155.00 ex VAT | £186.00 Inc VAT Add to basket