No products in the cart.

Go Direct™ 3-Axis Magnetic Field Sensor

Return to Previous Page

Product Description

Go Direct Bluetooth force and acceleration sensor
Go Direct™ Force and Acceleration Sensor £134.00 ex VAT | £160.80 Inc VAT
Go Direct Bluetooth Drop counter
Go Direct™ Drop Counter £134.00 ex VAT | £160.80 Inc VAT

£94.00 ex VAT | £112.80 Inc VAT

The Go Direct 3-Axis Magnetic Field Sensor allows you to determine the magnitude and direction of the magnetic field at any point in space. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.

In stock

Add to Wishlist
SKU: VR157344 Category:

Description

The Go Direct 3-Axis Magnetic Field Sensor measures the components of the magnetic field along three orthogonal axes. This allows you to determine the magnitude and direction of the magnetic field at any point in space. If desired, measure the field along only two axes, or even one axis, choosing the direction that is best for the experiment.

The Go Direct 3-Axis Magnetic Field Sensor can be used in a variety of experiments:

  • Quantify the magnetic field strength of induced magnets.
  • Determine the declination and inclination of the Earth’s magnetic field at your location using vector components.
  • Investigate the relationship between magnetic field strength, coils per unit length, and current in the center of a solenoid.

Rechargeable Battery—Ready When You Are
The Go Direct robust rechargeable battery offers long battery life and provides always-ready operation. Monitor battery life directly from our free Graphical Analysis™ 4 app. Should the battery run low, simply connect the sensor to the charging cable and keep on collecting—no interruptions or inconvenience to you or your students.

Wired or Wireless—The Flexibility to Choose
Our Go Direct™ 3-Axis Magnetic Field Sensor connects directly to your mobile device, Chromebook, or computer using our free Graphical Analysis™ 4 app—no additional equipment or software purchases are necessary. Go Direct sensors can be used wired via USB or wirelessly via Bluetooth, allowing you to choose the solution best for your classroom or laboratory.

Experiments

Physical Science with Vernier

  • Electromagnets: Winding Things Up
  • Magnetic Field Explorations

Middle School Science with Vernier

  • Mapping a Magnetic Field
  • Electromagnets

Specification

  • Measurement range: ±130 mT
  • Operating temperature: –40°C to 85°C
  • Dimensions: 19 cm long, wand portion 12.2 cm long. Wand tapers from 0.8 cm square at handle to 0.7 cm square at tip. Designed to be placed inside a solenoid if needed.
  • Calibration: Factory-calibrated, user does not need to calibrate.
    Connections:
  • Wireless: Bluetooth
  • Wired: USB

Go Direct Compatibility Requirements

LabQuest 2

Go Direct™ Sensors are fully compatible with LabQuest 2 (version 2.8.4), a standalone data logger with built-in graphing and analysis software. Please see the compatibility notes below for details.

Learn more about LabQuest 2 »

COMPATIBILITY NOTES

  1. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Computers

InterfaceGraphical Analysis for Computers
VERSION 4.4

NO INTERFACE REQUIRED

Full support 1

LABQUEST 2

Full support 23

COMPATIBILITY NOTES

  1. For Bluetooth® connectivity, only computers running Windows 10 or Mac OS X 10.10 or newer are supported. The computer must also have a compatible Bluetooth 4.0+ radio.
  2. Connect this sensor directly to a computer or Chromebook via a USB or wireless Bluetooth® connection for best results. Alternatively, this sensor is fully supported when used with LabQuest 2 when LabQuest 2 is connected to a computer or Chromebook via Wireless Data Sharing.
  3. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Chromebooks

InterfaceGraphical Analysis for Chrome
VERSION 4.4

NO INTERFACE REQUIRED

Full Support

LABQUEST 2

Full Support 12

COMPATIBILITY NOTES

  1. Connect this sensor directly to a computer or Chromebook via a USB or wireless Bluetooth® connection for best results. Alternatively, this sensor is fully supported when used with LabQuest 2 when LabQuest 2 is connected to a computer or Chromebook via Wireless Data Sharing.
  2. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

iOS

InterfaceSoftware

Graphical Analysis 4 for iOS
VERSION 4.0.3

NO INTERFACE REQUIRED

Full Support

LABQUEST 2

Full Support 123

COMPATIBILITY NOTES

  1. Connect this sensor directly to a supported mobile device via a wireless Bluetooth® connection for best results.
  2. Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
  3. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Android

InterfaceSoftware

Graphical Analysis for Android
VERSION 4.4

Graphical Analysis GW for Android
VERSION 3.2

NO INTERFACE REQUIRED

Full Support

Incompatiable

LABQUEST 2

Full Support 123

Full Support 23

COMPATIBILITY NOTES

  1. Connect this sensor directly to a supported mobile device via a wireless Bluetooth® connection for best results.
  2. Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
  3. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Accessories

Related Products

Go Direct Bluetooth gas pressure sensor
Go Direct™ Gas Pressure Sensor
The Go Direct Gas Pressure Sensor measures the absolute pressure of a gas. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£121.00 ex VAT | £145.20 Inc VAT Add to basket
Go Direct Respiration Belt
Go Direct™ Respiration Belt
The Go Direct Respiration Belt measures human respiration rate after exercise or during breath holding. It connects wirelessly via Bluetooth® or wired via USB to your device.
£134.00 ex VAT | £160.80 Inc VAT Add to basket
Go Direct Bluetooth pH sensor
Go Direct™ pH Sensor
The Go Direct pH Sensor is a general-purpose pH sensor used to monitor pH of aqueous solutions. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£121.00 ex VAT | £145.20 Inc VAT Add to basket
Go Direct Bluetooth Conductivity probe
Go Direct™ Conductivity Probe
The Go Direct Conductivity Probe determines the ionic content of an aqueous solution by measuring its electrical conductivity. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£134.00 ex VAT | £160.80 Inc VAT Add to basket
Go Direct Bluetooth Spectrophotometer
Go Direct™ SpectroVis® Plus Spectrophotometer
The Go Direct SpectroVis Plus Spectrophotometer quickly measures a full wavelength spectrum. It directly connects wirelessly via Bluetooth® or wired via USB to your platform. Use with the Vernier Spectrophotometer Optical Fiber.
£548.00 ex VAT | £657.60 Inc VAT Add to basket
Go Direct Temperature Teachers Pack
Go Direct™ Temperature Teachers Pack
The Go Direct Temperature Probe is a rugged, general-purpose temperature sensor that students can use to monitor temperature. It directly connects wirelessly via Bluetooth® or wired via USB to your platform. The teachers pack includes 8 Go Direct Temperature Probes and a Go Direct Charging Station.
£815.00 ex VAT | £978.00 Inc VAT Add to basket
Go_Direct_Surface_Temperature_Sensor_main
Go Direct™ Surface Temperature Sensor
Designed for use in situations in which low thermal mass or flexibility is required, the Go Direct Surface Temperature Sensor connects wirelessly via Bluetooth® or wired via USB to your device.
£94.00 ex VAT | £112.80 Inc VAT Add to basket
Go Direct Current Probe
Go Direct™ Current Probe
The Go Direct Current Probe measures the electric currents in circuits. It connects wirelessly via Bluetooth or wired via USB to your device.
£100.00 ex VAT | £120.00 Inc VAT Add to basket
Go Direct Calcium ISE
Go Direct® Calcium Ion-Selective Electrode
The Go Direct Calcium Ion-Selective Electrode (ISE) can be used to measure the concentration of calcium (Ca2+) in aqueous samples. It connects via Bluetooth® wireless technology or wired via USB to your device.
Read more
Go Direct Bluetooth Temperature Probe
Go Direct™ Temperature Probe
The Go Direct Temperature Probe is a rugged, general-purpose temperature sensor that students can use to monitor temperature. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£94.00 ex VAT | £112.80 Inc VAT Add to basket
Go Direct Bluetooth ORP sensor
Go Direct™ ORP Sensor
The Go Direct ORP (Oxidation-Reduction Potential) Sensor measures the ability of a solution to act as an oxidizing or reducing agent. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£134.00 ex VAT | £160.80 Inc VAT Add to basket
Go Direct Bluetooth Light and colour Sensor
Go Direct™ Light and Colour Sensor
The Go Direct Light and Colour Sensor is a powerful and versatile light sensor that measures light in the visible to ultraviolet electromagnetic spectrum. An RGB colour sensor detects relative contributions of primary colors in light. Go Direct Light and Colour directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£107.00 ex VAT | £128.40 Inc VAT Add to basket
Go Direct Bluetooth force and acceleration sensor
Go Direct™ Force and Acceleration Sensor
The Go Direct Force and Acceleration Sensor couples a 3-axis accelerometer with a stable and accurate force sensor that measures forces as small as ±0.1 N and up to ±50 N. Measure pushes and pulls in the classroom or outdoors. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£134.00 ex VAT | £160.80 Inc VAT Add to basket
Go Direct Bluetooth melt point apparatus
Go Direct™ Melt Station
The Go Direct Melt Station accurately determines the melting temperature of solid substances. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£725.00 ex VAT | £870.00 Inc VAT Add to basket
Go Direct bluetooth colorimeter
Go Direct™ Colorimeter
The 4-wavelength Go Direct Colorimeter measures absorbance or transmittance of a liquid sample. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£161.00 ex VAT | £193.20 Inc VAT Add to basket

IDS Logo

Tel: 01530 832500

Email: [email protected]

Instruments Direct Services Limited is a Limited company registered in England and Wales. Registration Number 5092064.

©Instruments Direct Services Limited

All displayed prices are exclusive of delivery & VAT. E&OE.

All images are for illustrative purposes only.

Besa Logo