£338.00 ex VAT | £405.60 Inc VAT
The Go Direct Ammonium Ion-Selective Electrode (ISE) can be used to measure the concentration of ammonium (NH4+) in aqueous samples. It connects via Bluetooth® wireless technology or wired via USB to your device.
Available to Order
Description
Use the Go Direct Ammonium Ion-Selective Electrode to wirelessly measure levels of ammonium ions introduced from fertilizers. It can also indicate aqueous ammonia levels, if sample solutions are acidified to convert NH3 to NH4+.
The versatile BNC connector allows students to easily replace the electrode when it expires or becomes damaged. You need only replace the electrode and not the entire sensor—lowering your overall equipment costs.
The Go Direct Ammonium Ion-Selective Electrode has a combination-style, non-refillable, gel-filled electrode. Like all other PVC ISE membranes, the membrane on the ISE has a limited life expectancy. However, the replaceable module of ISE allows you to simply discard the used membrane module and replace it with a new one.
Rechargeable Battery—Ready When You Are
The Go Direct robust rechargeable battery offers long battery life and provides always-ready operation. Monitor battery life directly from our free Graphical Analysis™ 4 app. Should the battery run low, simply connect the sensor to the charging cable and keep on collecting—no interruptions or inconvenience to you or your students.
Wired or Wireless—The Flexibility to Choose
Our Go Direct sensors connect directly to your mobile device, Chromebook™, or computer using our free Graphical Analysis™ 4 app—no additional equipment or software purchases are necessary. Go Direct sensors can be used wired via USB or wirelessly via Bluetooth wireless technology, allowing you to choose the solution best for your classroom or laboratory.
Note: We recommend that you do not purchase ISE replacement modules too far in advance of their expected time of use as degradation occurs while they are stored on the shelf.
Important: Ion-Selective Electrodes require good chemical technique and careful calibration to obtain accurate results; they are not recommended for middle school or elementary students.
What's Included
- Go Direct ISE Amplifier attached to a Go Direct Ammonium Ion-Selective Electrode BNC
- Micro USB cable
- 30 mL bottle of High Standard solution with SDS (100 mg/L NH4+ as N)
- 30 mL bottle of Low Standard solution with SDS (1 mg/L NH4+ as N)
- Short-Term ISE Soaking Bottle
Specification
- Range (mV): ±1000 mV
- Range (concentration): 1 to 18,000 mg/L (or ppm)
- Accuracy: ±10% of full scale (calibrated 1 to 100 mg/L)
- Interfering ions: K+, Li+, Na+, Cs+, Mg2+, Ca2+, Sr2+, Ba2+
- pH range: 2–7 (no pH compensation)
- Temperature range: 0–40°C (no temperature compensation)
- Electrode slope: 55 ±3 mV/decade at 25°C
- Electrode resistance: 0.1 to 5 MΩ
- Minimum sample size: must be submerged 2.8 cm (1.1 in)
- Connections: Wireless: Bluetooth, Wired: USB
Go Direct Compatibility Requirements
Go Direct™ Sensors are fully compatible with LabQuest 2 (version 2.8.4), a standalone data logger with built-in graphing and analysis software. Please see the compatibility notes below for details.
Learn more about LabQuest 2 »
COMPATIBILITY NOTES
- Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.
Interface | Graphical Analysis for Computers VERSION 4.4 |
---|---|
NO INTERFACE REQUIRED | Full support 1 |
LABQUEST 2 | Full support 23 |
COMPATIBILITY NOTES
- For Bluetooth® connectivity, only computers running Windows 10 or Mac OS X 10.10 or newer are supported. The computer must also have a compatible Bluetooth 4.0+ radio.
- Connect this sensor directly to a computer or Chromebook via a USB or wireless Bluetooth® connection for best results. Alternatively, this sensor is fully supported when used with LabQuest 2 when LabQuest 2 is connected to a computer or Chromebook via Wireless Data Sharing.
- Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.
Interface | Graphical Analysis for Chrome VERSION 4.4 |
---|---|
NO INTERFACE REQUIRED | Full Support |
LABQUEST 2 | Full Support 12 |
COMPATIBILITY NOTES
- Connect this sensor directly to a computer or Chromebook via a USB or wireless Bluetooth® connection for best results. Alternatively, this sensor is fully supported when used with LabQuest 2 when LabQuest 2 is connected to a computer or Chromebook via Wireless Data Sharing.
- Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.
Interface | Software |
---|---|
Graphical Analysis 4 for iOS | |
NO INTERFACE REQUIRED | Full Support |
LABQUEST 2 | Full Support 123 |
COMPATIBILITY NOTES
- Connect this sensor directly to a supported mobile device via a wireless Bluetooth® connection for best results.
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
- Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.
Interface | Software | |
---|---|---|
Graphical Analysis for Android | Graphical Analysis GW for Android | |
NO INTERFACE REQUIRED | Full Support | Incompatiable |
LABQUEST 2 | Full Support 123 | Full Support 23 |
COMPATIBILITY NOTES
- Connect this sensor directly to a supported mobile device via a wireless Bluetooth® connection for best results.
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
- Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.