Go Direct™ Conductivity Probe

Return to Previous Page

Product Description

Go Direct Bluetooth Spectrophotometer
Go Direct™ SpectroVis® ... £549.00 ex VAT | £658.80 Inc VAT
Go Direct Bluetooth force and acceleration sensor
Go Direct™ Force and Ac... £135.00 ex VAT | £162.00 Inc VAT

£135.00 ex VAT | £162.00 Inc VAT

The Go Direct Conductivity Probe determines the ionic content of an aqueous solution by measuring its electrical conductivity. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.

Available to Order

Add to Wishlist
SKU: VR157376 Category:

Description

Go Direct Conductivity Probe determines the ionic content of an aqueous solution by measuring its electrical conductivity. It features a built-in temperature sensor to simultaneously read conductivity and temperature. Automatic temperature compensation allows students to calibrate the probe in the lab and then make measurements outdoors without temperature changes affecting data. This temperature compensation can be turned off to perform conductivity studies as a function of temperature.

The Go Direct Conductivity Probe has a range of 0 to 20,000 μS/cm to provide optimal precision in any given range. An alternating current at its electrodes prevents polarization and electrolysis, reducing contamination of solutions. Its ABS-body graphite electrode resists the corrosion typical in metal electrodes.

The Go Direct Conductivity Probe can be used in a variety of experiments:

  • Demonstrate diffusion of ions through membranes.
  • Investigate the difference between ionic and molecular compounds, strong and weak acids, or ionic compounds that yield different ratios of ions.
  • Measure Total Dissolved Solids (TDS).

Rechargeable Battery—Ready When You Are
The Go Direct robust rechargeable battery offers long battery life and provides always-ready operation. Monitor battery life directly from our free Graphical Analysis™ 4 app. Should the battery run low, simply connect the sensor to the charging cable and keep on collecting—no interruptions or inconvenience to you or your students.

Wired or Wireless—The Flexibility to Choose
Our Go Direct™ Conductivity Probe connects directly to your mobile device, Chromebook, or computer using our free Graphical Analysis™ 4 app—no additional equipment or software purchases are necessary. Go Direct sensors can be used wired via USB or wirelessly via Bluetooth, allowing you to choose the solution best for your classroom or laboratory.

Experiments

Physical Science with Vernier

  • Neutralisation Reactions
  • Conducting Solutions
  • Conductivity of Saltwater: The Effect of Concentration
  • Acid Strengths

Middle School Science with Vernier

  • Water Hardness Study
  • Diffusion: How Fast?
  • A Water Field Study

Investigating Chemistry through Inquiry

  • Conductivity of Aqueous Solutions
  • Long Term Water Monitoring
  • Conductimetric Titrations

Chemistry with Vernier

  • Properties of Solutions: Electrolytes and Non-Electrolytes
  • Conductivity of Solutions: The Effect of Concentration
  • Using Conductivity to Find an Equivalence Point

Advanced Chemistry with Vernier

  • Conductimetric Titration and Gravimetric Determination of a Precipitate

 

 

Specification

  • Range: 0 to 20,000 μS/cm (0 to 10,000 mg/L TDS)
  • Temperature compensation: Automatic from 5 to 35°C, can be turned off
  • Temperature range (can be placed in): 0 to 80°C
  • Cell constant: 1.0 cm-1
  • Description: ABS body, parallel carbon (graphite) electrodes
  • Dimensions: 12 mm OD and 120 mm length
    Connections:
  • Wireless: Bluetooth
  • Wired: USB

Go Direct Compatibility Requirements

LabQuest 2

Go Direct™ Sensors are fully compatible with LabQuest 2 (version 2.8.4), a standalone data logger with built-in graphing and analysis software. Please see the compatibility notes below for details.

Learn more about LabQuest 2 »

COMPATIBILITY NOTES

  1. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Computers

InterfaceGraphical Analysis for Computers
VERSION 4.4

NO INTERFACE REQUIRED

Full support 1

LABQUEST 2

Full support 23

COMPATIBILITY NOTES

  1. For Bluetooth® connectivity, only computers running Windows 10 or Mac OS X 10.10 or newer are supported. The computer must also have a compatible Bluetooth 4.0+ radio.
  2. Connect this sensor directly to a computer or Chromebook via a USB or wireless Bluetooth® connection for best results. Alternatively, this sensor is fully supported when used with LabQuest 2 when LabQuest 2 is connected to a computer or Chromebook via Wireless Data Sharing.
  3. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Chromebooks

InterfaceGraphical Analysis for Chrome
VERSION 4.4

NO INTERFACE REQUIRED

Full Support

LABQUEST 2

Full Support 12

COMPATIBILITY NOTES

  1. Connect this sensor directly to a computer or Chromebook via a USB or wireless Bluetooth® connection for best results. Alternatively, this sensor is fully supported when used with LabQuest 2 when LabQuest 2 is connected to a computer or Chromebook via Wireless Data Sharing.
  2. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

iOS

InterfaceSoftware

Graphical Analysis 4 for iOS
VERSION 4.0.3

NO INTERFACE REQUIRED

Full Support

LABQUEST 2

Full Support 123

COMPATIBILITY NOTES

  1. Connect this sensor directly to a supported mobile device via a wireless Bluetooth® connection for best results.
  2. Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
  3. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Android

InterfaceSoftware

Graphical Analysis for Android
VERSION 4.4

Graphical Analysis GW for Android
VERSION 3.2

NO INTERFACE REQUIRED

Full Support

Incompatiable

LABQUEST 2

Full Support 123

Full Support 23

COMPATIBILITY NOTES

  1. Connect this sensor directly to a supported mobile device via a wireless Bluetooth® connection for best results.
  2. Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
  3. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Accessories

Related Products

Go Direct CO2 Gas Sensor
Go Direct® CO2 Gas Sensor
The Go Direct CO2 Gas Sensor measures gaseous carbon dioxide concentration levels, air temperature, and relative humidity. It can be used in a variety of biology experiments. It connects wirelessly via Bluetooth® or wired via USB to your device.
£271.00 ex VAT | £325.20 Inc VAT Add to basket
Go Direct Bluetooth Spectrophotometer
Go Direct™ SpectroVis® Plus Spectrophotometer
The Go Direct SpectroVis Plus Spectrophotometer quickly measures a full wavelength spectrum. It directly connects wirelessly via Bluetooth® or wired via USB to your platform. Use with the Vernier Spectrophotometer Optical Fiber.
£549.00 ex VAT | £658.80 Inc VAT Add to basket
Go Direct O2 Gas Sensor
Go Direct® O2 Gas Sensor
The Go Direct O2 Gas Sensor measures gaseous oxygen concentration levels and air temperature. It is useful for a variety of biology and physiology experiments. It connects wirelessly via Bluetooth® or wired via USB to your device.
£257.00 ex VAT | £308.40 Inc VAT Add to basket
Go Direct Bluetooth Constant Current system
Go Direct™ Constant Current System
The Go Direct Constant Current System is a DC power source with a built-in current probe designed for use in electrochemistry experiments. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£104.00 ex VAT | £124.80 Inc VAT Add to basket
Go Direct Bluetooth Drop counter
Go Direct™ Drop Counter
The Go Direct Drop Counter precisely records the number of drops of titrant added during a titration and then automatically converts it to volume. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£135.00 ex VAT | £162.00 Inc VAT Add to basket
Go Direct Bluetooth Temperature Probe
Go Direct™ Temperature Probe
The Go Direct Temperature Probe is a rugged, general-purpose temperature sensor that students can use to monitor temperature. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£94.00 ex VAT | £112.80 Inc VAT Add to basket
Go Direct bluetooth colorimeter
Go Direct™ Colorimeter
The 4-wavelength Go Direct Colorimeter measures absorbance or transmittance of a liquid sample. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£162.00 ex VAT | £194.40 Inc VAT Add to basket
Go_Direct_Charge_Station
Go Direct™ Charge Station
The Go Direct™ Charge Station is the perfect solution for charging your Go Direct Sensors. Each charge station has sixteen charging ports—eight USB and eight wand-style sensor ports. USB cables and sensors shown are not included.
£97.00 ex VAT | £116.40 Inc VAT Add to basket
Go Direct Tris Compatible pH Probe
Go Direct® Tris-Compatible Flat pH Sensor
Use the Go Direct™ Tris-Compatible Flat pH Sensor to measure the pH of a solution or semisolid, such as food or soil.
£157.00 ex VAT | £188.40 Inc VAT Add to basket
Go_Direct_Rotary_Motion
Go Direct™ Rotary Motion Sensor
The Go Direct Rotary Motion Sensor measures angular motion. It connects wirelessly via Bluetooth® or wired via USB to your device.
£243.00 ex VAT | £291.60 Inc VAT Add to basket
Go Direct Bluetooth Radiation Monitor
Go Direct™ Radiation Monitor
The Go Direct Radiation Monitor detects alpha, beta, gamma, and X-ray radiation. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£243.00 ex VAT | £291.60 Inc VAT Add to basket
Go Direct Glass Body pH Probe
Go Direct® Glass-Body pH Sensor
Use the Go Direct Glass-Body pH to measure pH in aqueous, heterogeneous, and organic solutions.
£189.00 ex VAT | £226.80 Inc VAT Add to basket
Go Direct Bluetooth ORP sensor
Go Direct™ ORP Sensor
The Go Direct ORP (Oxidation-Reduction Potential) Sensor measures the ability of a solution to act as an oxidizing or reducing agent. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£135.00 ex VAT | £162.00 Inc VAT Add to basket
Go_Direct_Surface_Temperature_Sensor_main
Go Direct™ Surface Temperature Sensor
Designed for use in situations in which low thermal mass or flexibility is required, the Go Direct Surface Temperature Sensor connects wirelessly via Bluetooth® or wired via USB to your device.
£108.00 ex VAT | £129.60 Inc VAT Add to basket
Go Direct EKG Sensor
Go Direct® EKG Sensor
The Go Direct EKG Sensor records electrical signals produced during heart or muscle contractions. It connects wirelessly via Bluetooth® or wired via USB to your device.
£216.00 ex VAT | £259.20 Inc VAT Add to basket

IDS Logo

Tel: 01530 832500

Email: [email protected]

Instruments Direct Services Limited is a Limited company registered in England and Wales. Registration Number 5092064.

©Instruments Direct Services Limited

All displayed prices are exclusive of delivery & VAT. E&OE.
All images are for illustrative purposes only.

Besa Logo