No products in the cart.

Go Direct™ Current Probe

Return to Previous Page

Product Description

Go Direct pH Teachers Pack
Go Direct™ pH Teachers Pack £1,031.00 ex VAT | £1,237.20 Inc VAT
Go Direct Respiration Belt
Go Direct™ Respiration Belt £134.00 ex VAT | £160.80 Inc VAT

£100.00 ex VAT | £120.00 Inc VAT

The Go Direct Current Probe measures the electric currents in circuits. It connects wirelessly via Bluetooth or wired via USB to your device.

In stock

Add to Wishlist
SKU: VR157720 Category:

Description

Simplify your experimental setup with the Go Direct Current Probe. It connects wirelessly via Bluetooth® or wired via USB to your device. The wireless connection eliminates additional cables that can clutter the lab bench.

Capture small currents like those produced by a magnet falling through a coil.

Use in combination with the Go Direct Voltage Probe to investigate Ohm’s law or series and parallel circuits.

Explore RC and RLC circuits.

Rechargeable Battery—Ready When You Are
The Go Direct robust rechargeable battery offers long battery life and provides always-ready operation. Monitor battery life directly from our free Graphical Analysis™ 4 app. Should the battery run low, simply connect the sensor to the charging cable and keep on collecting—no interruptions or inconvenience to you or your students.

Wired or Wireless—The Flexibility to Choose
Our Go Direct™ Current Probe connects directly to your mobile device, Chromebook, or computer using our free Graphical Analysis™ 4 app—no additional equipment or software purchases are necessary. Go Direct sensors can be used wired via USB or wirelessly via Bluetooth, allowing you to choose the solution best for your classroom or laboratory.

Experiments

Specification

  • Range: +/- 1 A and +/- 0.1 A
  • Maximum non-damaging current: 1.5 A and 0.5 A
  • Typical resolution: 0.031 mA and 0.003 mA
  • Connections:
  • Wireless: Bluetooth
  • Wired: USB

Go Direct Compatibility Requirements

LabQuest 2

Go Direct™ Sensors are fully compatible with LabQuest 2 (version 2.8.4), a standalone data logger with built-in graphing and analysis software. Please see the compatibility notes below for details.

Learn more about LabQuest 2 »

COMPATIBILITY NOTES

  1. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Computers

InterfaceGraphical Analysis for Computers
VERSION 4.4

NO INTERFACE REQUIRED

Full support 1

LABQUEST 2

Full support 23

COMPATIBILITY NOTES

  1. For Bluetooth® connectivity, only computers running Windows 10 or Mac OS X 10.10 or newer are supported. The computer must also have a compatible Bluetooth 4.0+ radio.
  2. Connect this sensor directly to a computer or Chromebook via a USB or wireless Bluetooth® connection for best results. Alternatively, this sensor is fully supported when used with LabQuest 2 when LabQuest 2 is connected to a computer or Chromebook via Wireless Data Sharing.
  3. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Chromebooks

InterfaceGraphical Analysis for Chrome
VERSION 4.4

NO INTERFACE REQUIRED

Full Support

LABQUEST 2

Full Support 12

COMPATIBILITY NOTES

  1. Connect this sensor directly to a computer or Chromebook via a USB or wireless Bluetooth® connection for best results. Alternatively, this sensor is fully supported when used with LabQuest 2 when LabQuest 2 is connected to a computer or Chromebook via Wireless Data Sharing.
  2. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

iOS

InterfaceSoftware

Graphical Analysis 4 for iOS
VERSION 4.0.3

NO INTERFACE REQUIRED

Full Support

LABQUEST 2

Full Support 123

COMPATIBILITY NOTES

  1. Connect this sensor directly to a supported mobile device via a wireless Bluetooth® connection for best results.
  2. Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
  3. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Android

InterfaceSoftware

Graphical Analysis for Android
VERSION 4.4

Graphical Analysis GW for Android
VERSION 3.2

NO INTERFACE REQUIRED

Full Support

Incompatiable

LABQUEST 2

Full Support 123

Full Support 23

COMPATIBILITY NOTES

  1. Connect this sensor directly to a supported mobile device via a wireless Bluetooth® connection for best results.
  2. Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
  3. Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Related Products

Go_Direct_voltage_probe
Go Direct™ Voltage Probe
The Go Direct Voltage Probe combines a wide input voltage range and high precision, making it an excellent choice for investigations of both AC/DC circuits and electromagnetism. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£94.00 ex VAT | £112.80 Inc VAT Add to basket
Go Direct Respiration Belt
Go Direct™ Respiration Belt
The Go Direct Respiration Belt measures human respiration rate after exercise or during breath holding. It connects wirelessly via Bluetooth® or wired via USB to your device.
£134.00 ex VAT | £160.80 Inc VAT Add to basket
Go Direct Glass Body pH Probe
Go Direct® Glass-Body pH Sensor
Use the Go Direct Glass-Body pH to measure pH in aqueous, heterogeneous, and organic solutions.
£189.00 ex VAT | £226.80 Inc VAT Add to basket
Go Direct Bluetooth Spectrophotometer
Go Direct™ SpectroVis® Plus Spectrophotometer
The Go Direct SpectroVis Plus Spectrophotometer quickly measures a full wavelength spectrum. It directly connects wirelessly via Bluetooth® or wired via USB to your platform. Use with the Vernier Spectrophotometer Optical Fiber.
£548.00 ex VAT | £657.60 Inc VAT Add to basket
Go Direct Bluetooth BNC Electrode Amplifier
Go Direct™ Electrode Amplifier
The Go Direct Electrode Amplifier is a mV and pH amplifier that connects to Vernier electrodes and compatible third-party BNC electrodes. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£87.00 ex VAT | £104.40 Inc VAT Add to basket
Go Direct Ammonium ISE
Go Direct® Ammonium Ion-Selective Electrode
The Go Direct Ammonium Ion-Selective Electrode (ISE) can be used to measure the concentration of ammonium (NH4+) in aqueous samples. It connects via Bluetooth® wireless technology or wired via USB to your device.
£338.00 ex VAT | £405.60 Inc VAT Add to basket
Go Direct pH Teachers Pack
Go Direct™ pH Teachers Pack
The Go Direct pH Sensor is a general-purpose pH sensor used to monitor pH of aqueous solutions. It directly connects wirelessly via Bluetooth® or wired via USB to your platform. The teachers pack includes 8 Go Direct pH Probes and a Go Direct Charging Station.
£1,031.00 ex VAT | £1,237.20 Inc VAT Add to basket
Go Direct Bluetooth Drop counter
Go Direct™ Drop Counter
The Go Direct Drop Counter precisely records the number of drops of titrant added during a titration and then automatically converts it to volume. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£134.00 ex VAT | £160.80 Inc VAT Add to basket
Go_Direct_Acceleration_Sensor_main
Go Direct™ Acceleration Sensor
Collect acceleration, rotation, and altitude data in the classroom or in the field. Go Direct Acceleration Sensor connects wirelessly via Bluetooth® or wired via USB to your device.
£134.00 ex VAT | £160.80 Inc VAT Add to basket
Go Direct EKG Sensor
Go Direct® EKG Sensor
The Go Direct EKG Sensor records electrical signals produced during heart or muscle contractions. It connects wirelessly via Bluetooth® or wired via USB to your device.
£216.00 ex VAT | £259.20 Inc VAT Add to basket
Go Direct Bluetooth Motion sensor
Go Direct™ Motion Detector
The Go Direct Motion Detector uses ultrasound to measure the position, velocity, and acceleration of moving objects. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£134.00 ex VAT | £160.80 Inc VAT Add to basket
Go_Direct_Surface_Temperature_Sensor_main
Go Direct™ Surface Temperature Sensor
Designed for use in situations in which low thermal mass or flexibility is required, the Go Direct Surface Temperature Sensor connects wirelessly via Bluetooth® or wired via USB to your device.
£94.00 ex VAT | £112.80 Inc VAT Add to basket
Go Direct Bluetooth Light and colour Sensor
Go Direct™ Light and Colour Sensor
The Go Direct Light and Colour Sensor is a powerful and versatile light sensor that measures light in the visible to ultraviolet electromagnetic spectrum. An RGB colour sensor detects relative contributions of primary colors in light. Go Direct Light and Colour directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£107.00 ex VAT | £128.40 Inc VAT Add to basket
Go Direct Calcium ISE
Go Direct® Calcium Ion-Selective Electrode
The Go Direct Calcium Ion-Selective Electrode (ISE) can be used to measure the concentration of calcium (Ca2+) in aqueous samples. It connects via Bluetooth® wireless technology or wired via USB to your device.
Read more
Go Direct bluetooth colorimeter
Go Direct™ Colorimeter
The 4-wavelength Go Direct Colorimeter measures absorbance or transmittance of a liquid sample. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
£161.00 ex VAT | £193.20 Inc VAT Add to basket

IDS Logo

Tel: 01530 832500

Email: [email protected]

Instruments Direct Services Limited is a Limited company registered in England and Wales. Registration Number 5092064.

©Instruments Direct Services Limited

All displayed prices are exclusive of delivery & VAT. E&OE.

All images are for illustrative purposes only.

Besa Logo