Go Wireless Heart Rate Monitor

Return to Previous Page

Product Description

Hand Grip Heart Rate Monitor
Hand Grip Heart Rate Monitor £167.00 ex VAT | £200.40 Inc VAT
Go Wireless Exerise Heart Rate
Go Wireless Exercise Heart Rat... £102.00 ex VAT | £122.40 Inc VAT

£128.00 ex VAT | £153.60 Inc VAT

The Vernier Go Wireless Heart Rate is ideal for continuously monitoring heart rate before, during, and after exercise or while a person is stationary. Data are wirelessly transmitted to iPad, LabQuest 2, or other mobile devices that are Bluetooth® Smart Ready. It is simple and easy to use, displays live heart rate readouts before data collection, and is easy to clean and share between students.

Available to Order

SKU: VR128304 Categories: ,

Experiments

The Heart Rate Monitor can be found in the following Vernier Lab books:-

Human Physiology with Vernier

  • Heart Rate as a Vital Sign
  • Heart Rate and Exercise
  • Heart Rate Response to Baroreceptor Feedback
  • Effect of Coughing on Heart Rate
  • Heart Rate and Blood Pressure as Vital Signs
  • Heart Rate, Blood Pressure, and Exercise

Biology with Vernier

  • Heart Rate and Physical Fitness
  • Ventilation and Heart Rate

Advanced Biology with Vernier

  • Heart Rate and Physical Fitness

Investigating Biology through Enquiry

  • Heart Rate

Middle School Science with Vernier

  • Heart Rate and Body Position
  • Heart Rate and Exercise

 

What's Included

  • Heart Rate Hand Grips
  • Polar Transmitter Module
  • User Manual

Specification

  • Battery Type: CR 2025
  • Battery Lifetime: 200 hrs
  • Operating Temperature: -10 to 50 °C
  • Wireless range: 10 m or more unobstructed
  • Radios: Bluetooth and 5 kHz RF transmission

Requirements:
The Go Wireless® Heart Rate is recommended for devices that are Bluetooth Smart Ready and the appropriate software.

Click here to Download User Guide

Sensor Requirements

The Go Wireless Heart Rate may require a compatible interface and software. Choose a platform below to see compatible interface and software options.

LabQuest 2

The Go Wireless Heart Rate is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.

Learn more about LabQuest 2 »

COMPATIBILITY NOTES

  1. Requires a Go Wireless USB Radio when used with some LabQuest 2 models

Computers

 Software
InterfaceLogger ProLogger LiteGraphical Analysis 4
No Interface RequiredIncompatibleIncompatibleFull support1
LabQuest MiniFull support2Full support2Full support2 3
LabQuest 2Full support2Full support2Full support2 3
LabQuest StreamFull support2Full support2 5Full support2 3 4
Go!LinkFull support2Full support2Full support2 3
Original LabQuest
(DISCONTINUED)		Full support2Full support2Full support2 3
LabPro
(DISCONTINUED)		Full support2Full support2Incompatible

COMPATIBILITY NOTES

  1. For Bluetooth connectivity, only computers running Windows 10 or Mac OS X 10.10 or newer are supported. The computer must also have a compatible Bluetooth 4.0+ ratio.
  2. Requires a Heart Rate Receiver to connect to an interface
  3. Connect this sensor via Bluetooth® for best results.
  4. Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth® technology
  5. Connect LabQuest Stream via USB. Wireless connection is not supported.

Chromebooks

InterfaceSoftware
Graphical Analysis for Chrome
No interface requiredFull support
LabQuest MiniFull support1 2
LabQuest 2Full support1 2
LabQuest StreamFull support1 2 3
Go!LinkFull support1 2
Original LabQuest
(DISCONTINUED)		Full support1 2

COMPATIBILITY NOTES

  1. Requires a Heart Rate Receiver to connect to an interface
  2. Connect this sensor via Bluetooth® for best results.
  3. Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth® technology

Mobile Devices

 Software
InterfaceGraphical Analysis for iOSGraphical Analysis for Android
NO INTERFACE REQUIREDFull supportFull support
LabQuest StreamFuture support1 2 3Future support1 2 3
LabQuest 2Full support2 4Full support2 4

COMPATIBILITY NOTES

  1. Requires a Heart Rate Receiver to connect to an interface
  2. Connect this sensor via Bluetooth® for best results.
  3. Future software updates will add support for a LabQuest Stream interface.
  4. iOS and Android™ devices can only connect to LabQuest 2 via Wireless Data Sharing.
  5. Connect this sensor directly to a supported mobile device via a wireless Bluetooth® connection for best results.

Real-Time Temperature Measurement!

Go Direct Temperature Probe

Unlike a traditional thermometer, Go Direct Temperature allows students to collect real-time temperature measurements of a single instance or over a period of time. Its range and wireless capability make it the go-to sensor.

Click here to learn more

Join our Education Newsletter

Go Direct Cover Half

Download a copy of our brochure

Related Products

Chemical Polarimeter
Quick View
Chemical Polarimeter
The Polarimeter can be used to measure chiral properties of optically active samples without chemically modifying or destroying the sample. This is a vertical polarimeter that uses a 589 nm LED, a fixed polarizer, and a manually rotated polarizer to detect changes in rotation of plane-polarized light in the presence of an optically active compound. Used with Vernier technology, students no longer have to determine the optical maximum with their eye but have a graph that shows a clear change in the light's polarization.  
£708.00 ex VAT | £849.60 Inc VAT Add to basket
Go Wireless Exerise Heart Rate
Quick View
Go Wireless Exercise Heart Rate Monitor
The Vernier Go Wireless Exercise Heart Rate is an excellent hands-free option for continuously monitoring heart rate before, during, and after exercise or while a person is stationary. Using the chest strap, data are wirelessly transmitted to iPad, LabQuest 2, or other mobile devices that are Bluetooth® Smart Ready. It displays live heart readouts before data collection,and is ideal for running, cycling and other physical activities. For an option to monitor heart rate with hands, please consider the Go Wireless Heart Rate.
£102.00 ex VAT | £122.40 Inc VAT Add to basket
Calcium Ion Selective Electrode
Quick View
Calcium Ion-Selective Electrode
Data from the Calcium ISE can give a good indication of hardness of water (as Ca2+). The concentration of Calcium is also used as an endpoint indicator in EDTA-Ca/Mg hardwater titrations. The Calcium ISE has a combination-style, non-refillable, gel-filled electrode. Like all other PVC ISE membranes, the membrane on the ISE has a limited life expectancy. However, the replaceable module of ISE allows you to simply discard the used membrane module, and replace it with a new one. Note: We recommend that you do not purchase ISE replacement modules too far in advance of their expected time of use as degradation occurs while they are stored on the shelf.
£346.00 ex VAT | £415.20 Inc VAT Add to basket
Optical Dissolved Oxygen Probe
Quick View
Optical Dissolved Oxygen Probe
The Vernier Optical DO Probe uses luminescent technology to provide fast, easy, and accurate results, making it a terrific choice for biology, ecology, or environmental science courses. Students can measure dissolved oxygen concentration in surface water or to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Using Plug and play technology, no filling solution is required, no warm up time needed, no stirring and no calibration.
£476.00 ex VAT | £571.20 Inc VAT Add to basket
Ammonium Ion Selective Electrode
Quick View
Ammonium Ion-Selective Electrode
Use the Ammonium ISE to measure levels of ammonium ions introduced from fertilizers. It can also indicate aqueous ammonia levels if sample solutions are acidified to convert NH3 to NH4+. The Ammonium ISE has a combination-style, non-refillable, gel-filled electrode. Like all other PVC ISE membranes, the membrane on the ISE has a limited life expectancy. However, the replaceable module of ISE allows you to simply discard the used membrane module, and replace it with a new one. Note: We recommend that you do not purchase ISE replacement modules too far in advance of their expected time of use as degradation occurs while they are stored on the shelf.
£346.00 ex VAT | £415.20 Inc VAT Add to basket
Digital Control Unit
Quick View
Digital Control Unit
The Digital Control Unit (DCU), combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM and engineering projects.
£83.00 ex VAT | £99.60 Inc VAT Add to basket
Low g Accelerometer Probe
Quick View
Low-g Accelerometer Sensor
Ideal for most acceleration experiments. Use it for studying the one-dimensional motion of a car (real and toy), lift, pendulum bob, or amusement park ride.
  • Range: -50 to +50 m/s2
  • Typical accuracy: ±0.1 m/s
£115.00 ex VAT | £138.00 Inc VAT Add to basket
30V Volt Probe
Quick View
30-Volt Voltage Probe
This sensor is used to measure voltages in the range of -30 to +30 volts
£64.00 ex VAT | £76.80 Inc VAT Add to basket
Blood Pressure Sensor
Quick View
Blood Pressure Sensor
This is a non-invasive sensor designed to measure human blood pressure. It measures systolic, diastolic and mean arterial pressure utilizing the oscillometric technique. Pulse rate is also reported.
£155.00 ex VAT | £186.00 Inc VAT Add to basket
25 g Accelerometer Probe
Quick View
25-g Accelerometer Sensor
This is great for studying one-dimensional collisions or any motion with larger accelerations.
  • Range: -250 to +250 m/s2
  • Typical accuracy: ±1 m/s2
£142.00 ex VAT | £170.40 Inc VAT Add to basket
Gas Pressure Sensor
Quick View
Gas Pressure Sensor
The Gas Pressure Sensor can be used to monitor pressure changes in a gas. The range is wide enough to perform Boyle's law yet it is sensitive enough to conduct vapor-pressure or pressure-temperature experiments. Biology teachers can use the Gas Pressure Sensor to monitor transpiration or respiration in an enclosed environment.
£122.00 ex VAT | £146.40 Inc VAT Add to basket
CO2 Gas Sensor
Quick View
CO2 Gas Sensor
The CO2 Gas Sensor measures gaseous carbon dioxide levels in two selectable ranges of 0 to 10,000 ppm and 0 to 100,000 ppm (which covers human breath). Ideal for measuring changes in Carbon Dioxide levels during plant photosynthesis and respiration. You can easily monitor changes in CO2 levels occurring in respiration of organisms as small as crickets or beans! The CO2 Gas Sensor is easily calibrated using a calibration button. A chamber is included for running controlled experiments with small plants and animals. You may also wish to see our O2 Gas Sensor
£380.00 ex VAT | £456.00 Inc VAT Add to basket
Mini GC Plus
Quick View
Mini GC Plus Gas Chromatograph

The Mini GC Plus has been replaced by the Go Direct Mini GC.

The Mini GC Plus is a portable instrument for separating, analyzing, and identifying substances contained in a volatile liquid or gaseous sample. The Mini GC uses Air as its carrier gas so no external gas cylinders required.
Read more
Constant Current System
Quick View
Constant Current System
The Constant Current System is a DC power source with a built-in current probe designed for use in electrochemistry experiments, and as such eliminates the need for a separate power supply when performing electroplating and electrolysis experiments in Chemistry. It is capable of delivering 0.6 A at 5VDC Use the Constant Current System to explore Faraday's law and determine Avogadro's Number. Note: It can only be used in conjunction with its own built-in power supply. It cannot be used to measure the current of a circuit using a different power supply.
£108.00 ex VAT | £129.60 Inc VAT Add to basket
EKG Sensor
Quick View
EKG Sensor
The EKG Sensor measures electrical signals produced during muscle contractions, and can be used to make standard 3-lead EKG tracings or surface EMG recordings. The EKG Sensor measures electrical signals produced by the heart. It uses three disposable electrodes. An EKG graph is displayed, demonstrating to students the contraction and repolarization of the heart's chambers. A package of 100 disposable electrodes is included with the sensor.
£231.00 ex VAT | £277.20 Inc VAT Add to basket

IDS Logo

Tel: 01530 832500

Email: [email protected]

ª Delivery time is approximate and will be confirmed once processed.

Instruments Direct Services Limited is a Limited company registered in England and Wales. Registration Number 5092064.

©Instruments Direct Services Limited

All displayed prices are exclusive of delivery & VAT. E&OE.
All images are for illustrative purposes only.

Besa Logo