No products in the cart.
Year Warranty| Interface | LabQuest App |
|---|---|
| Full Support | |
LabQuest 2 (Discontinued) | Full Support |
| Labquest 1 (discontinued) | Full Support |
Product Description
£207.00 ex VAT | £248.40 Inc VAT
The Goniometer measures the angle of a joint, such as the knee or elbow. Use it to analyze the range of motion of a limb during different types of physical activity.
In stock
Email to a friendDescription
The Goniometer can be used to measure the dynamic motion of a limb during different types of physical activity.
- A set of elastic straps are used to secure the sensor to the subject.
- The lightweight and flexible joint arms allow the limb to move naturally.
- Use it with an EKG Sensor to measure muscle activity during limb motion.
- The sensor can also be detached from the base plate and flexible arms so it can be used in a variety of STEM and engineering activities.
What's Included
- Goniometer: joint angle sensor with base plate attached to static arm
- 12-inch flexible joint arm
- 10-inch flexible joint arm
- 8-inch flexible joint arm
- Two 24-inch elastic, hook-and-loop straps
- Two 14-inch elastic, hook-and-loop straps
- User manual
Specification
Range: 0-340° (+/-170°)
Resolution:
- 13-bit (SensorDAQ): 0.06°
- 12-bit (LabQuest 2, LabQuest, LabQuest Mini, Go!Link, LabPro): 0.12°
- 10-bit (CBL 2): 0.5°
Requirements
Choose a platform below to see compatible interface and software options.
| Interface | Software | ||
|---|---|---|---|
| Graphical Analysis for Computers Version 5.4 | Logger Pro Version 3.16 | Logger Lite Verison 1.9.4 | |
| LabQuest Mini | Full support | Full support | Full support |
| LabQuest 3 | Full support | Full support | Full support |
| LabQuest 2 (Discontinued) | Full support | Full support | Full support |
| LabQuest Stream | Full support1 | Full support | Full support1 |
| Go!Link | Full support | Full support | Full support |
| Original LabQuest (Discontinued) | Full support | Full support | Full support |
| LabPro (Discontinued) | Incompatible | Full support | Full support |
COMPATIBILITY NOTES
1. Connect LabQuest Stream via USB. Wireless connection is not supported.
| Interface | Software |
|---|---|
| Graphical Analysis for Chrome Version 5.4 | |
| LabQuest Mini | Full support |
| LabQuest 3 | Full support |
| LabQuest 2 (Discontinued) | Full support |
| LabQuest Stream | Full support1 3 |
| Go!Link | Full support |
| Original LabQuest (Discontinued) | Full support |
COMPATIBILITY NOTES
1. Connect LabQuest Stream via USB. Wireless connection is not supported.
| Interface | Software | |
|---|---|---|
| Graphical Analysis App for iOS Version 5.4 | Graphical Analysis GW Verison 4.0.6 | |
| LabQuest Stream | Full support | Full support |
| LabQuest 3 | Full support 1 | Full support 1 |
| LabQuest 2 (Discontinued) | Full support 1 | Full support 1 |
COMPATIBILITY NOTES
1.Mobile devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
| Interface | Software | |
|---|---|---|
| Graphical Analysis App for Android Version 5.4 | Graphical Analysis GW Verison 3.2 | |
| LabQuest Stream | Full support | Full support |
| LabQuest 3 | Full support 1 | Full support 1 |
| LabQuest 2 (Discontinued) | Full support 1 | Full support 1 |
COMPATIBILITY NOTES
1.Mobile devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
The Anemometer can be used in a variety of experiments to measure wind speed. Can either be used hand held to measure wind speeds, or used with the accessory rod for static experiments such as in front of wind tunnels. The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30 m/s (1 to 67 mph).
£116.00 ex VAT | £139.20 Inc VAT Add to basket
The Barometer can be used to measure and monitor atmospheric pressure. It works well for conducting weather studies or experiments that involve pressures close to normal atmospheric pressure. It can also be used as an altimeter if you have a portable interface.
£93.00 ex VAT | £111.60 Inc VAT Add to basket
The Mini GC Plus has been replaced by the Go Direct Mini GC.
The Mini GC Plus is a portable instrument for separating, analyzing, and identifying substances contained in a volatile liquid or gaseous sample. The Mini GC uses Air as its carrier gas so no external gas cylinders required.
This is a non-invasive sensor designed to measure human blood pressure. It measures systolic, diastolic and mean arterial pressure utilizing the oscillometric technique. Pulse rate is also reported.
£142.00 ex VAT | £170.40 Inc VAT Add to basket
The Flow Rate Sensor can be used for environmental or Earth science studies. Flow rate data can be used to calculate the discharge value for a stream or determine the sediment transport of a stream. The Flow Rate Sensor includes 3 riser rods, which enable the impeller to be placed at fixed depths, and is equipped with a 5 m cable so your data-collection equipment can stay on shore. The Flow Rate Sensor also separates into four sections for easy transport and convenient storage.
£168.00 ex VAT | £201.60 Inc VAT Add to basket
The Instrumentation Amplifier monitors voltages from 20 mV to 1 V (DC or AC). It has several switch settings to allow you to select the best gain and includes auto-ID functionality for each of the six ranges. Input bandwidth of 10 kHz allows the capture of higher frequency signals. It is typically used to amplify the chart recorder or analog output of any instrument, such as a third-party gas chromatograph.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The CO2 Gas Sensor measures gaseous carbon dioxide levels in two selectable ranges of 0 to 10,000 ppm and 0 to 100,000 ppm (which covers human breath). Ideal for measuring changes in Carbon Dioxide levels during plant photosynthesis and respiration. You can easily monitor changes in CO2 levels occurring in respiration of organisms as small as crickets or beans! The CO2 Gas Sensor is easily calibrated using a calibration button. A chamber is included for running controlled experiments with small plants and animals. You may also wish to see our O2 Gas Sensor
£350.00 ex VAT | £420.00 Inc VAT Add to basket
The Current Probe can be used to measure currents in low-voltage AC and DC circuits or electrochemistry experiments. The Current Probe measures DC and low-frequency AC currents up to 600 mA.
£51.00 ex VAT | £61.20 Inc VAT Add to basket
The Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This has many applications in chemistry, biology, and environmental science. The Conductivity Probe has three ranges, providing optimal precision in any given range. Biology teachers can use this probe to demonstrate diffusion of ions through membranes. Chemistry students are able to quickly investigate the difference between ionic and molecular compounds, strong and weak acids, or ionic compounds that yield different ratios of ions. Environmental science students use it to measure TDS, total dissolved solids.
£129.00 ex VAT | £154.80 Inc VAT Add to basket
The Digital Control Unit (DCU), combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM and engineering projects.
£80.00 ex VAT | £96.00 Inc VAT Add to basket
The EKG Sensor measures electrical signals produced during muscle contractions, and can be used to make standard 3-lead EKG tracings or surface EMG recordings. The EKG Sensor measures electrical signals produced by the heart. It uses three disposable electrodes. An EKG graph is displayed, demonstrating to students the contraction and repolarization of the heart's chambers. A package of 100 disposable electrodes is included with the sensor.
£206.00 ex VAT | £247.20 Inc VAT Add to basket
Use the High Current Sensor in experiments that involve currents larger than 1 A, such as solar panels, hand generators, and other alternative energy projects. The High Current Sensor has a range of ±10 A. Current is measured with a Hall Effect sensor, which uses the magnetic field created by the current and therefore does not add a resistive element to the circuit. A metal shield over the Hall Effect chip reduces the influence of external magnets. A replaceable fuse protects the equipment and circuit
£103.00 ex VAT | £123.60 Inc VAT Add to basket
Ideal for most acceleration experiments. Use it for studying the one-dimensional motion of a car (real and toy), lift, pendulum bob, or amusement park ride.
£116.00 ex VAT | £139.20 Inc VAT Add to basket- Range: -50 to +50 m/s2
- Typical accuracy: ±0.1 m/s
The Gas Pressure Sensor can be used to monitor pressure changes in a gas. The range is wide enough to perform Boyle's law yet it is sensitive enough to conduct vapor-pressure or pressure-temperature experiments. Biology teachers can use the Gas Pressure Sensor to monitor transpiration or respiration in an enclosed environment.
£116.00 ex VAT | £139.20 Inc VAT Add to basket
This is great for studying one-dimensional collisions or any motion with larger accelerations.
£125.00 ex VAT | £150.00 Inc VAT Add to basket- Range: -250 to +250 m/s2
- Typical accuracy: ±1 m/s2