No products in the cart.
Product Description
£48.00 – £478.00
Ceramic cell Cylindrical, with tip, Ø 15 x 40 mm
Overall length approx. 160 mm
Insertion depth typical 70 mm
Technical Specification
| Measurement | Measurement of soil moisture through the identification of suction pressure. |
| Measure range | 0 to 1000 hPa relative (negative pressure) |
| Output | 0.3 to 3.0 V |
| Power supply | 5 V via ALMEMO® connector |
| Cable | Sensor with cable, length = 5m, with ALMEMO® connector |
Technical Features
- Measurement of soil moisture through the identifi cation of suction pressure. The suction pressure is the force with which water is being held in the soil or is available for absorption. This is the force that must be produced by the plant roots in order for water to be absorbed.
- The porous, clay tip of the tensiometer transfers water from within to the drier outer surroundings by means of capillarity, thereby, creating a sub-pressure within the sealed tensiometer tube. This sub-pressure is a measure of the moisture level and can be determined as a value or used directly to activate an electrical switch. The customary unit of measurement is hPa.
- However, a tensiometer also functions in dry air as long as evaporation can take place over the porous, clay chamber. Therefore, moisture levels can be measured even in coarse grained or very loose substrate.
- Suction pressure measurements are largely independent of the salt concentration of the substrate or soil.
| Typical Suction Pressure at Peat Substrates | |
| 30 - 40 hPa | Very moist |
| 50 - 120 hPa | Moist |
| 150 - 200 hPa | Dried |
| >200 hPa | Dry |
| Typical Suction Pressure at Open Fields (intermediate grade soil) | |
| <50 hPa | Saturated |
| 100 - 150 hPa | Wet to moist |
| >200 hPa | Start drying |
| 200 - 500 hPa | Irrigation |
Related Products
Ceramic cell Cylindrical, with tip, Ø 20 x 65 mm
Overall length approx. 340 mm
Insertion depth typical 250 mm
£61.00 – £490.00 Select options
Standard model for use on capillary matting, for moist to moderately moist cultivation or for general measurement on moist surfaces.
Dimensions: 65 mm, Ø 70 mm
£83.00 – £512.00 Select options
Sensor completely porous for measuring in thin layers of substrate.
Dimensions: 65 mm, Ø 70 mm
Sink deep: approx. 30 - 60 mm
£73.00 – £502.00 Select options