No products in the cart.
This generator has 4-foot leads which are attached with shrink-wrapped, reinforced soldering. Typical output in non-geared wind devices is 0.5-2.5 V at 0.1-0.3 A.
Product Description
£10.00 ex VAT | £12.00 Inc VAT
This smooth running generator delivers high power output at relatively low revs and is the primary generator for wind turbine experiments. It is also the standard generator used in the KidWind Challenge competition events.
Available to Order
Email to a friendDescription
Specification
- Voltage output: 0-10 V
- Amperage output: 0-0.3 A
- Diameter: 1.25 in
- Wire length: 4 ft
- Shaft diameter: 2 mm
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
Use the electrical output from your KidWind Solar Panel or Small Wind Turbine to play music or light LED bulbs with the Sound and Light Board.
£12.00 ex VAT | £14.40 Inc VAT Add to basket
Replacement KidWind Motor Mount Pack secures a motor to the nacelle.
£9,999.00 ex VAT | £11,998.80 Inc VAT Add to basket
The High Torque Generator produces a higher current and a lower voltage than the standard Wind Turbine Generator for a given rotor speed.
£12.00 ex VAT | £14.40 Inc VAT Add to basket
The simpleGEN is an easy-to-build AC generator that allows students to explore the basics of electrical generator design. Your students can now investigate the fundamentals of electrical generator design with an easy to build AC generator. The KidWind SimpleGEN enables you to demonstrate Faraday's law, light LEDs, and perform experiments that explore how coils, magnets, and rotation affect electrical generation. Convert your generator into a simple motor just by making a few quick alterations whilst also allowing for greater exploration. Further still, you can convert your simpleGEN into a wind turbine nacelle. The simpleGEN classroom pack has enough materials to build 10 generators and includes three digital multimeters. This Kit is also available in the KidWind simpleGEN Classroom Pack.
£77.00 ex VAT | £92.40 Inc VAT Add to basket
The MINI Wind Turbine with Blade Design allows students to perform basic blade experiments on a desk using a small house fan.
£85.00 ex VAT | £102.00 Inc VAT Add to basket
Turn any DC generator into a wind turbine with this three-pack of 12-hole crimping hubs. Made from recycled plastic.
£29.00 ex VAT | £34.80 Inc VAT Add to basket
Use this kit to Evaluate different blade designs, gear ratios, generators, and devices to measure electrical and weightlifting power, whilst discovering advanced aspects of wind turbine technology. Containing everything you need to unleash the advanced concepts of wind turbine technology! Conduct the same investigations as the Basic Wind Experiment Kit but with the ability to generate more power at higher voltages ( 0.5 V-20 V). This kit is ideal for years 8 through 12 as well as college students. It will provide young scientists with the opportunity to investigate gearboxes, Aerofoils and with the GenPack add-on; generator construction. They can also design and construct their own blades to generate electricity, lift weights, and pump water. Simply add your own wind source, basic tools, and imagination! This kit is also available in the Kidwind Advanced Experiment Kit, Classroom Pack.
£201.00 ex VAT | £241.20 Inc VAT Add to basket Containing everything you need to unleash the advanced concepts of wind turbine technology! Conduct the same investigations as the Basic Wind Experiment Kit but with the ability to generate more power at higher voltages ( 0.5 V-20 V). This kit is ideal for years 8 through 12 as well as college students. It will provide young scientists with the opportunity to investigate gearboxes, Aerofoils and with the GenPack add-on; generator construction. They can also design and construct their own blades to generate electricity, lift weights, and pump water. Simply add your own wind source, basic tools, and imagination! The classroom pack option includes three turbines, extra hubs and blade consumables (for approximately 24 students).
£506.00 ex VAT | £607.20 Inc VAT Add to basket
Try using different gear ratios on your wind turbine with this handy kit.
£12.00 ex VAT | £14.40 Inc VAT Add to basket Turn any DC generator into a wind turbine with this pack of 12-hole crimping hubs. Made from recycled plastic.
£90.00 ex VAT | £108.00 Inc VAT Add to basket
Use this rugged, affordable mini wind turbine to illustrate the power of wind. This easily assembled turbine that produces enough power to light an LED bulb and play a tune. A small domestic fan will produces enough draught to demonstrate this highly efficient turbine. The basic kit just comes with Red Blade Set. The MINI Wind Turbine with Blade Design comes with a Wind Turbine Hub, a Digital Multimeter, 25 1/4" x 5" Dowels and a 3" x 12" Chipboard Sheet to allow students to perform basic blade experiments. More dowels and chipboad can be purchased as and when required. This kit is also available in the KidWind MINI Wind Turbine with Blade Design.
£64.00 ex VAT | £76.80 Inc VAT Add to basket
The same as the KidWind simpleGEN but has enough materials to build 10 generators and includes three digital multimeters. Your students can now investigate the fundamentals of electrical generator design with an easy to build AC generator. The KidWind SimpleGEN enables you to demonstrate Faraday's law, light LEDs, and perform experiments that explore how coils, magnets, and rotation affect electrical generation. Convert your generator into a simple motor just by making a few quick alterations whilst also allowing for greater exploration. Further still, you can convert your simpleGEN into a wind turbine nacelle.
£565.00 ex VAT | £678.00 Inc VAT Add to basket
Educate young scientists to generate electricity, lift weights and test a variety of blade designs with this popular kit. This popular kit allows young scientists to test a variety of blade designs, generate electricity, and lift weights using nothing but wind energy. The Basic Wind Experiment Kit supplies you with everything you need to begin understanding wind power. Explore wind energy affordably and easily, just add the wind, basic tools, and your imagination. Great for grades 4-12 and groups, as well as individual science fair projects. The classroom pack option includes three turbines and extra hubs and blade consumables (for approximately 24 students).
£402.00 ex VAT | £482.40 Inc VAT Add to basket
This great recyclable material is low cost, stiff, easy to work and light making it ideal for creating blades for wind turbines.
£25.00 ex VAT | £30.00 Inc VAT Add to basket
The 10 Pack Basic Turbine Building Parts kit includes 10 KidWind Hubs, 10 wind turbine generators, and 250 dowels, all in one package.
£181.00 ex VAT | £217.20 Inc VAT Add to basket