No products in the cart.
Product Description
£11.45 ex VAT | £13.74 Inc VAT
The Nitrate test strip is used to detect Nitrate in solution at 10, 25, 50, 100, 250, & 500ppm. Nitrate test strips are often used to test fertiliser run-off in agricultural areas. This strip is very sensitive to light and moisture, so be sure to keep the vial tightly sealed. For a dual Nitrate-Nitrite test, check out or combo test strip with both tests in one.
- Water-resistant label
- 50 test strips
- Desiccant vial with flip-top lid
Available to Order
Description
Instructions
- Remove one test strip from the container. Do not touch the test pad to your finger.
- Dip the test pad into the solution being tested for 2-3 seconds.
- Remove the strip and shake off excess liquid.
- Compare to the colour chart after 1 minute.
Additional Information
Vial Dimensions: 1.125″ (D) x 3.375″ (H) [29mm (D) x 86mm (H)]
Strip Dimensions: 2.5″ (L) x .1875″ (W) [64mm (L) x 5mm (W)]
Shelf-Life: 1 year
Related Products
The Water Hardness test strip is calibrated at 0, 50, 125, 250, and 500ppm, and is also calibrated at 0, 3, 7, 15, and 30 grains per gallon. Determine whether you have hard or soft water in just seconds. The Water Hardness test strip measures water hardness due to calcium carbonate.
£11.00 ex VAT | £13.20 Inc VAT Add to basket- Water-resistant label
- 50 test strips
- Resealable amber bag
The Nitrite test strip is used to detect Nitrite in solution at increments of 1, 5, 10, & 25ppm. These strips are often used when testing for Nitrites in wine, seafood, and sandwich meats, such as ham and bologna. This strip is very sensitive to light and moisture, so be sure to keep the vial tightly sealed. For a dual Nitrate-Nitrite test, check out or combo test strip with both tests in one.
£11.45 ex VAT | £13.74 Inc VAT Add to basket- Water-resistant label
- 50 test strips
- Desiccant vial with flip-top lid