Year WarrantyThe O2 Gas Sensor is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.
Learn more about LabQuest 2 »
Product Description
£259.00 ex VAT | £310.80 Inc VAT
The O2 Gas Sensor can be used to monitor gaseous oxygen levels in a variety of biology and chemistry experiments. The sensor is intended for measuring gaseous, not aqueous, O2 concentration.
Available to Order
Email to a friendExperiments
The O2 Gas Sensor can be found in the following Vernier Lab books:-
- Enzyme Action: Testing Catalase Activity
- Cell Respiration (O2)
- Cell Respiration (CO2 and O2)
- Effect of Temperature on Cold Blooded Organisms
- Oxygen Gas and Human Respiration
- Photosynthesis and Respiration (O2)
- Photosynthesis and Respiration (CO2 and O2)
Agricultural Science with Vernier
- Photosynthesis and Respiration (O2)
- Photosynthesis and Respiration (CO2 and O2)
- Cell Respiration (O2)
- Cell Respiration (CO2 and O2)
- Enzyme Action: Testing Catalase Activity
- Oxygen Gas and Respiration
- Oxygen and Aerobic Metabolism
- Oxygen Extraction by the Lungs
- Effect of “Dead Space” on Oxygen Exchange
Investigating Biology Through Enquiry
- Testing Catalase Activity (O2 Gas Sensor)
- Enzyme Action: Testing Catalase Activity
- Cell Respiration (CO2 and O2)
- Cell Respiration (O2)
Specification
- Measurement Range: 0-27% (0-270 ppt)
- Accuracy (@ Standard Pressure 760 mm Hg): +/- 1% volume O2
- Resolution: 0.01% (LabQuest, LabQuest Mini, Go!Link)
- Response Time: ~12 seconds to 90% of final value
- Warm-Up Time: Less than 5 seconds to 90% of final value
- Pressure Effect: Directly proportional, Vout = Vout (standard) x (P/1013), Pressure range: 0.5 atm to 1.5 atm
- Output Signal Range: 0 to 4.8 VDC; 2.7 to 3.8 VDC @ 21% O2
- Output Impedance: 1 KΩ
- Input Voltage: 5 VDC +/-0.25 VDC
- Gas Sampling Mode: Diffusion
- Operating Temperature Range: 5 to 40°C
- Operating Humidity Range: 0 to 95% RH
- Storage Temperature Range: -20 to +60°C
- Dimensions: Sensor Tube 45 mm length, 28 mm OD, Total length 120 mm
Sensor Requirements
The O2 Gas Sensor may require a compatible interface and software. Choose a platform below to see compatible interface and software options.
| Software | ||
|---|---|---|
| Interface | Logger Pro | Logger Lite |
| LabQuest Mini | Full support | Full support |
| LabQuest 2 | Full support | Full support |
| LabQuest Stream | Full support1 | Full support1 |
| Go!Link | Full support | Full support |
| Go Wireless® Link | Future support2 | Future support2 |
| Original LabQuest (DISCONTINUED) | Full support | Full support |
| LabPro (DISCONTINUED) | Full support | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
- A computer with a compatible Bluetooth® 4.0 radio is required. Only computers running Windows 10 or Mac OS X 10.10 or newer are supported.
| Interface | Software Graphical Analysis for Chrome |
|---|---|
| LabQuest Mini | Full support |
| LabQuest 2 | Full support |
| LabQuest Stream | Full support1 |
| Go!Link | Full support |
| Original LabQuest (DISCONTINUED) | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
| Software | ||
|---|---|---|
| Interface | Graphical Analysis for iOS | Graphical Analysis for Android |
| LabQuest Stream | Full support1 | Full support1 |
| LabQuest 2 | Full Support2 | Full Support2 |
| Go Wireless Link | Full support1 | Full support1 |
COMPATIBILITY NOTES
- Data can be collected using the sensor’s default calibration. Future software updates will support calibration modifications.
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
Accessories
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
The Constant Current System is a DC power source with a built-in current probe designed for use in electrochemistry experiments, and as such eliminates the need for a separate power supply when performing electroplating and electrolysis experiments in Chemistry. It is capable of delivering 0.6 A at 5VDC
Use the Constant Current System to explore Faraday's law and determine Avogadro's Number.
Note: It can only be used in conjunction with its own built-in power supply. It cannot be used to measure the current of a circuit using a different power supply.
£90.00 ex VAT | £108.00 Inc VAT
Add to basket 
Designed for much higher forces than the Dual-Range Force Sensor, the Force Plate can measure the forces developed during stepping, jumping, and other human-scale actions. For example, you can perform the following kinds of experiments:
£376.00 ex VAT | £451.20 Inc VAT
Add to basket - Observe the change in normal force during a ride in a lift.
- Measure the impulse delivered by the floor during a jump.
- Measure the reaction force as a student leans against a wall.
The EKG Sensor measures electrical signals produced during muscle contractions, and can be used to make standard 3-lead EKG tracings or surface EMG recordings.
The EKG Sensor measures electrical signals produced by the heart. It uses three disposable electrodes. An EKG graph is displayed, demonstrating to students the contraction and repolarization of the heart's chambers. A package of 100 disposable electrodes is included with the sensor.
£200.00 ex VAT | £240.00 Inc VAT
Add to basket 
The Vernier Energy Sensor offers an easy way to quantify voltage, current, power, and energy output of small wind turbines and solar panels such as those used in our KidWind Experiment Kits. Simply connect a source such as a small wind turbine or solar panel to one side and a load such as the Variable Load or a resistor on the Vernier Resistor Board to the other side.
The Energy Sensor measures the current and voltage of the system. Data-collection and analysis software, such as Logger Pro or LabQuest App can then calculate the power and energy output.
£114.00 ex VAT | £136.80 Inc VAT
Add to basket 
This sensor is used to measure voltages in the range of -30 to +30 volts
£64.00 ex VAT | £76.80 Inc VAT
Add to basket 
The Flow Rate Sensor can be used for environmental or Earth science studies. Flow rate data can be used to calculate the discharge value for a stream or determine the sediment transport of a stream. The Flow Rate Sensor includes 3 riser rods, which enable the impeller to be placed at fixed depths, and is equipped with a 5 m cable so your data-collection equipment can stay on shore. The Flow Rate Sensor also separates into four sections for easy transport and convenient storage.
£168.00 ex VAT | £201.60 Inc VAT
Add to basket 
The Vernier Go Wireless Heart Rate is ideal for continuously monitoring heart rate before, during, and after exercise or while a person is stationary. Data are wirelessly transmitted to iPad, LabQuest 2, or other mobile devices that are Bluetooth® Smart Ready. It is simple and easy to use, displays live heart rate readouts before data collection, and is easy to clean and share between students.
£116.00 ex VAT | £139.20 Inc VAT
Add to basket 
The Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This has many applications in chemistry, biology, and environmental science.
The Conductivity Probe has three ranges, providing optimal precision in any given range. Biology teachers can use this probe to demonstrate diffusion of ions through membranes. Chemistry students are able to quickly investigate the difference between ionic and molecular compounds, strong and weak acids, or ionic compounds that yield different ratios of ions. Environmental science students use it to measure TDS, total dissolved solids.
£129.00 ex VAT | £154.80 Inc VAT
Add to basket 
The Vernier Optical DO Probe uses luminescent technology to provide fast, easy, and accurate results, making it a terrific choice for biology, ecology, or environmental science courses. Students can measure dissolved oxygen concentration in surface water or to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment.
Using Plug and play technology, no filling solution is required, no warm up time needed, no stirring and no calibration.
£389.00 ex VAT | £466.80 Inc VAT
Add to basket 
Our strain-gauge based isometric Hand Dynamometer can be used to measure grip strength, pinch strength, and to perform muscle fatigue studies. Use the hand dynamometer with other sensors (e.g., EKG Sensor) to study muscular health and activity
£140.00 ex VAT | £168.00 Inc VAT
Add to basket 
This sensor can be used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample.
£155.00 ex VAT | £186.00 Inc VAT
Add to basket 
Use the Charge Sensor as an electronic electroscope to obtain quantitative measurements when studying charging by induction, friction, or contact.
£103.00 ex VAT | £123.60 Inc VAT
Add to basket 
Use the Dual-Range Force Sensor in a wide variety of experiments including the study of friction, simple harmonic motion, impact in collisions, or centripetal force. The Dual-Range Force Sensor has two ranges: ±10N or ±50N. It can be easily mounted on a Vernier Dynamics Cart for use with the Vernier Dynamics System. Mount one on the New Centripetal Force Apparatus, on a ring stand or even as a replacement for a hand-held spring scale.
Use it to study friction, simple harmonic motion, impact in collisions, or centripetal force.
£142.00 ex VAT | £170.40 Inc VAT
Add to basket 
This is a non-invasive sensor designed to measure human blood pressure. It measures systolic, diastolic and mean arterial pressure utilizing the oscillometric technique. Pulse rate is also reported.
£142.00 ex VAT | £170.40 Inc VAT
Add to basket