Use the Pressure Sensor 400 to conduct physical and analytical chemistry experiments, such as approximating the adiabatic expansion of a gas, Charles’ law experiments, and ideal gas law investigations. It measures absolute pressures from 0 to 400 kPa and operates with excellent accuracy over a wide temperature range. The robust metal fittings allow for a tight, leakproof seal to your reaction apparatus.
Description
What's Included
- Vernier Pressure Sensor 400
- User manual
- Accessories kit
- Double-barb brass connector to fit flexible tubing
- Nickel plated brass push-to-connect Connector to fit more rigid tubing
- Two-foot section of nylon tubing
- Two-foot section of plastic tubing
- Tightening wrenches and plumber’s tape to ensure a tight seal
Specification
- Range: 0–400 kPa
- Sensing element: Honeywell PX2 Series
- Accuracy using factory calibration: ±2 kPa
- Accuracy using custom calibration: ±1 kPa (1 point calibration at atmosphere)
- Temperature range: –40°C to 125°C
- Max pressure without damage: 800 kPa
Sensor Requirements
The Pressure Sensor 400 may require a compatible interface and software. Choose a platform below to see compatible interface and software options.
The Pressure Sensor 400 is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.
Learn more about LabQuest 2 »
| Software | ||
|---|---|---|
| Interface | Logger Pro | Logger Lite |
| LabQuest Mini | Full support | Full support |
| LabQuest 2 | Full support | Full support |
| LabQuest Stream | Full support1 | Full support1 |
| Go!Link | Full support | Full support |
| Go Wireless® Link | Future support2 | Future support2 |
| Original LabQuest (DISCONTINUED) | Full support | Full support |
| LabPro (DISCONTINUED) | Full support | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
- A computer with a compatible Bluetooth® 4.0 radio is required. Only computers running Windows 10 or Mac OS X 10.10 or newer are supported.
| Interface | Software Graphical Analysis for Chrome |
|---|---|
| LabQuest Mini | Full support |
| LabQuest 2 | Full support |
| LabQuest Stream | Full support1 |
| Go!Link | Full support |
| Original LabQuest (DISCONTINUED) | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
| Software | ||
|---|---|---|
| Interface | Graphical Analysis for iOS | Graphical Analysis for Android |
| LabQuest Stream | Full support | Full support |
| LabQuest 2 | Full support1 | Full support1 |
| Go Wireless® Link | Full support | Full support |
COMPATIBILITY NOTES
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
The CO2 Gas Sensor measures gaseous carbon dioxide levels in two selectable ranges of 0 to 10,000 ppm and 0 to 100,000 ppm (which covers human breath).
Ideal for measuring changes in Carbon Dioxide levels during plant photosynthesis and respiration. You can easily monitor changes in CO2 levels occurring in respiration of organisms as small as crickets or beans! The CO2 Gas Sensor is easily calibrated using a calibration button. A chamber is included for running controlled experiments with small plants and animals.
You may also wish to see our O2 Gas Sensor
£350.00 ex VAT | £420.00 Inc VAT
Add to basket 
The Instrumentation Amplifier monitors voltages from 20 mV to 1 V (DC or AC). It has several switch settings to allow you to select the best gain and includes auto-ID functionality for each of the six ranges. Input bandwidth of 10 kHz allows the capture of higher frequency signals. It is typically used to amplify the chart recorder or analog output of any instrument, such as a third-party gas chromatograph.
£103.00 ex VAT | £123.60 Inc VAT
Add to basket 
This is a non-invasive sensor designed to measure human blood pressure. It measures systolic, diastolic and mean arterial pressure utilizing the oscillometric technique. Pulse rate is also reported.
£142.00 ex VAT | £170.40 Inc VAT
Add to basket 
This is basically three Low-g Accelerometers mounted at right angles and all placed in a small box. Can be used for studying the complex motion of an amusement park ride, a bungee jumper, or simply a toss in the air.
Range: -50 to +50 m/s2
Typical accuracy: ±0.1 m/s2
£129.00 ex VAT | £154.80 Inc VAT
Add to basket 
Designed for much higher forces than the Dual-Range Force Sensor, the Force Plate can measure the forces developed during stepping, jumping, and other human-scale actions. For example, you can perform the following kinds of experiments:
£376.00 ex VAT | £451.20 Inc VAT
Add to basket - Observe the change in normal force during a ride in a lift.
- Measure the impulse delivered by the floor during a jump.
- Measure the reaction force as a student leans against a wall.
This sensor is used to measure voltages in the range of -30 to +30 volts
£64.00 ex VAT | £76.80 Inc VAT
Add to basket 
The Anemometer can be used in a variety of experiments to measure wind speed. Can either be used hand held to measure wind speeds, or used with the accessory rod for static experiments such as in front of wind tunnels. The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30 m/s (1 to 67 mph).
£116.00 ex VAT | £139.20 Inc VAT
Add to basket 
This sensor can be used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample.
£155.00 ex VAT | £186.00 Inc VAT
Add to basket 
The Barometer can be used to measure and monitor atmospheric pressure. It works well for conducting weather studies or experiments that involve pressures close to normal atmospheric pressure. It can also be used as an altimeter if you have a portable interface.
£92.00 ex VAT | £110.40 Inc VAT
Add to basket 
Use the Charge Sensor as an electronic electroscope to obtain quantitative measurements when studying charging by induction, friction, or contact.
£103.00 ex VAT | £123.60 Inc VAT
Add to basket 
The Digital Control Unit (DCU), combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM and engineering projects.
£79.00 ex VAT | £94.80 Inc VAT
Add to basket 
The EKG Sensor measures electrical signals produced during muscle contractions, and can be used to make standard 3-lead EKG tracings or surface EMG recordings.
The EKG Sensor measures electrical signals produced by the heart. It uses three disposable electrodes. An EKG graph is displayed, demonstrating to students the contraction and repolarization of the heart's chambers. A package of 100 disposable electrodes is included with the sensor.
£200.00 ex VAT | £240.00 Inc VAT
Add to basket 
The Colorimeter is great for Beer's law experiments, determining the concentration of unknown solutions, or studying changes in concentration vs. time.
This 4-wavelength Colorimeter measures the amount of light transmitted through a sample at a user-selectable wavelength in order to determine the concentration of a solution. Features such as automatic sensor identification and one-step calibration make this sensor easy to use. Fifteen 3.5 mL cuvettes are included. A package of 100 replacement cuvettes (with 20 lids) is available please click here
£155.00 ex VAT | £186.00 Inc VAT
Add to basket 
Use the Drop Counter to perform accurate, automatic titrations. Record the number of drops or calibrate the drop size to record volume of titrant added during a titration. Logger Pro software can automatically convert the number of drops into volume. The Drop Counter can be used for conductimetric or potentiometric titrations using our Conductivity Probe, Ion-Selective Electrodes or any electrode with a 0 to 5 volt output.
£129.00 ex VAT | £154.80 Inc VAT
Add to basket