Price range: £172.00 through £475.00
Redox-one-bar measuring chain 0 to 60°C for unpressurised operating.
Contact via Whatsapp 01530 832500
| Operating range: | 0 to 60°C |
| Operating Pressure: | unpressurised |
| Conductivity: | > 150 μS / cm |
| Diaphragm/Electrolyte: | ceramic/ KCl containing gel |
| Metal Electrode: | platinum |
| Shaft Length: | 125 ±3mm |
| Shaft Diameter: | 12 mm (material: plastic) |
| Electrode Head: | plug head SN6 |
Manual measurements e.g. swimming pools, drinking water ….
| ALMEMO® D7 plug | |
| Measuring ranges: pH value Redox potential Temperature NTC | 0.00 to 14.00 pH -1100.0 to +1100.0 mV -50.00 to +125.00 °C |
| A/D converter | Delta Sigma |
| Accuracy: pH/redox temperature NTC | ±0,02 % of measured value ±2 digits ±0,05 K at -50 to +100 °C |
| Nominal temperature: | 23 °C ±2 K |
| Temperature drift: | max. 0.004 %/K (40 ppm) |
| Operative range: | -10 to +60 °C / 10 to 90 % RH (non-condensing) |
| Refresh rate: | 0.8 s |
| Supply voltage: | from 6 V up, from the ALMEMO® measuring device |
| Current consumption: | approx. 8 mA |
| Temperature sensor NTC | |
| Design: | FN030L0250 with OPK03L0020 |
| Measuring tip: | stainless steel sheathed line, d = 3.0 mm, NL = 250 mm |
| Cable sleeve: | Brass, hexagonal, L= 65 mm, width across corners = 9 mm |
| Cable: | 2 m, FEP/FEP isolated, permanently mounted in the ALMEMO® D7 plug |
| Operating temperature: | -20 to 100 °C |
