No products in the cart.
Year WarrantyThe UVB Sensor is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.
Learn more about LabQuest 2 »
Product Description
£143.00 ex VAT | £171.60 Inc VAT
The UVB Sensor measures the intensity of ultraviolet radiation. It responds primarily to UVB radiation (290-320 nm). UVB radiation is commonly associated with sunburns, cataracts, and skin cancer.
The UVB Sensor is ideal for experiments using sunlight as your UV source and is the sensor recommended for the UV experiments in our lab books.
Available to Order
Email to a friendExperiments
The UVB Sensor can be found in the following Vernier Lab Books:-
Investigating Environmental Science through Enquiry
- A Local Weather Study
- UV Investigations
- Comparing Sunscreens
- Are All Sunglasses Created Equal?
- Comparing Sunscreens
- UV Light and Clothing
Vernier Engineering projects with LEGO MINDSTORMS EDUCATION NXT
- Sunscreen Tester
Specification
- Range: 0 to 900 mW/m2
- Wavelength sensitivity region: approximately 290 to 320 nm
- UV peak sensitivity: one volt per 204 mW/m2 at 315 nm
- 12-bit Resolution (LabPro, Go! Link): 0.3 mW/m2
Sensor Requirements
The UVB Sensor may require a compatible interface and software. Choose a platform below to see compatible interface and software options.
| Software | ||
|---|---|---|
| Interface | Logger Pro | Logger Lite |
| LabQuest Mini | Full support | Full support |
| LabQuest 2 | Full support | Full support |
| LabQuest Stream | Full support1 | Full support1 |
| Go!Link | Full support | Full support |
| Go Wireless® Link | Future support2 | Future support2 |
| Original LabQuest (DISCONTINUED) | Full support | Full support |
| LabPro (DISCONTINUED) | Full support | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
- A computer with a compatible Bluetooth® 4.0 radio is required. Only computers running Windows 10 or Mac OS X 10.10 or newer are supported.
| Interface | Software Graphical Analysis for Chrome |
|---|---|
| LabQuest Mini | Full support |
| LabQuest 2 | Full support |
| LabQuest Stream | Full support1 |
| Go!Link | Full support |
| Original LabQuest (DISCONTINUED) | Full support |
COMPATIBILITY NOTES
- Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
| Software | ||
|---|---|---|
| Interface | Graphical Analysis for iOS | Graphical Analysis for Android |
| LabQuest Stream | Full support | Full support |
| LabQuest 2 | Full support1 | Full support1 |
| Go Wireless® Link | Full support | Full support |
COMPATIBILITY NOTES
- Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
The Barometer can be used to measure and monitor atmospheric pressure. It works well for conducting weather studies or experiments that involve pressures close to normal atmospheric pressure. It can also be used as an altimeter if you have a portable interface.
£92.00 ex VAT | £110.40 Inc VAT Add to basket
The Vernier Go Wireless Exercise Heart Rate is an excellent hands-free option for continuously monitoring heart rate before, during, and after exercise or while a person is stationary. Using the chest strap, data are wirelessly transmitted to iPad, LabQuest 2, or other mobile devices that are Bluetooth® Smart Ready. It displays live heart readouts before data collection,and is ideal for running, cycling and other physical activities. For an option to monitor heart rate with hands, please consider the Go Wireless Heart Rate.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
This is great for studying one-dimensional collisions or any motion with larger accelerations.
£120.00 ex VAT | £144.00 Inc VAT Add to basket- Range: -250 to +250 m/s2
- Typical accuracy: ±1 m/s2
Use the Charge Sensor as an electronic electroscope to obtain quantitative measurements when studying charging by induction, friction, or contact.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The Anemometer can be used in a variety of experiments to measure wind speed. Can either be used hand held to measure wind speeds, or used with the accessory rod for static experiments such as in front of wind tunnels. The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30 m/s (1 to 67 mph).
£116.00 ex VAT | £139.20 Inc VAT Add to basket
The Goniometer measures the angle of a joint, such as the knee or elbow. Use it to analyze the range of motion of a limb during different types of physical activity.
£207.00 ex VAT | £248.40 Inc VAT Add to basket
Designed for much higher forces than the Dual-Range Force Sensor, the Force Plate can measure the forces developed during stepping, jumping, and other human-scale actions. For example, you can perform the following kinds of experiments:
£376.00 ex VAT | £451.20 Inc VAT Add to basket- Observe the change in normal force during a ride in a lift.
- Measure the impulse delivered by the floor during a jump.
- Measure the reaction force as a student leans against a wall.
The Flow Rate Sensor can be used for environmental or Earth science studies. Flow rate data can be used to calculate the discharge value for a stream or determine the sediment transport of a stream. The Flow Rate Sensor includes 3 riser rods, which enable the impeller to be placed at fixed depths, and is equipped with a 5 m cable so your data-collection equipment can stay on shore. The Flow Rate Sensor also separates into four sections for easy transport and convenient storage.
£168.00 ex VAT | £201.60 Inc VAT Add to basket
The Vernier Energy Sensor offers an easy way to quantify voltage, current, power, and energy output of small wind turbines and solar panels such as those used in our KidWind Experiment Kits. Simply connect a source such as a small wind turbine or solar panel to one side and a load such as the Variable Load or a resistor on the Vernier Resistor Board to the other side. The Energy Sensor measures the current and voltage of the system. Data-collection and analysis software, such as Logger Pro or LabQuest App can then calculate the power and energy output.
£114.00 ex VAT | £136.80 Inc VAT Add to basket
This is basically three Low-g Accelerometers mounted at right angles and all placed in a small box. Can be used for studying the complex motion of an amusement park ride, a bungee jumper, or simply a toss in the air.
Range: -50 to +50 m/s2
Typical accuracy: ±0.1 m/s2
£129.00 ex VAT | £154.80 Inc VAT Add to basket
This is a non-invasive sensor designed to measure human blood pressure. It measures systolic, diastolic and mean arterial pressure utilizing the oscillometric technique. Pulse rate is also reported.
£142.00 ex VAT | £170.40 Inc VAT Add to basket
This sensor can be used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample.
£155.00 ex VAT | £186.00 Inc VAT Add to basket
The Vernier Go Wireless Heart Rate is ideal for continuously monitoring heart rate before, during, and after exercise or while a person is stationary. Data are wirelessly transmitted to iPad, LabQuest 2, or other mobile devices that are Bluetooth® Smart Ready. It is simple and easy to use, displays live heart rate readouts before data collection, and is easy to clean and share between students.
£116.00 ex VAT | £139.20 Inc VAT Add to basket
The Mini GC Plus is a portable instrument for separating, analyzing, and identifying substances contained in a volatile liquid or gaseous sample. The Mini GC uses Air as its carrier gas so no external gas cylinders required.
£2,719.00 ex VAT | £3,262.80 Inc VAT Add to basket
The Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This has many applications in chemistry, biology, and environmental science. The Conductivity Probe has three ranges, providing optimal precision in any given range. Biology teachers can use this probe to demonstrate diffusion of ions through membranes. Chemistry students are able to quickly investigate the difference between ionic and molecular compounds, strong and weak acids, or ionic compounds that yield different ratios of ions. Environmental science students use it to measure TDS, total dissolved solids.
£129.00 ex VAT | £154.80 Inc VAT Add to basket