No products in the cart.
Year WarrantyThe Voltage Probe is fully supported with LabQuest 2, a standalone data logger with built-in graphing and analysis software.
Learn more about LabQuest 2 »
Product Description
£16.00 ex VAT | £19.20 Inc VAT
This Voltage Probe can be used with the Vernier LabPro, LabQuest, LabQuest Mini, Go!Link, Easylink, SensorDAQ and CBL 2 to measure direct voltage.
Available to Order
Experiments
The Voltage Probe can be found in the following Vernier Lab Books :-
- Establishing a Table of Reduction Potentials: Micro-Voltaic Cells
- Lead Storage Batteries
Advanced Chemistry with Vernier
- Electrochemistry: Voltaic Cells
Investigating Chemistry through Enquiry
- Investigating Voltaic Cells
Agricultural Science with Vernier
- Lemon “Juice”
- Photovoltaic Cells
- Wind Power
Investigating Environmental Science through Enquiry
- Wind Power
- Photovoltaic Cells
Middle School Science with Vernier
- Lemon “Juice”
- Lemon “Juice”
- Lead Storage Batteries
- Photovoltaic Cells
- Wind Power
Hands On Introduction to NI LabVIEW and Vernier
- Control Analog Out, Digital Out and Pulse Out
Specification
- Range: -10 to +1O V
- 12-bit Resolution (LabPro): 0.005 V (5 mV)
Sensor Requirements
The Voltage Probe may require a compatible interface and software. Choose a platform below to see compatible interface and software options.
| Interface | Software | ||
|---|---|---|---|
| Graphical Analysis 4 for Computers | Logger Pro | Logger Lite | |
| LabQuest Mini | Full support | Full support | Full support |
| LabQuest 2 | Full support | Full support | Full support |
| LabQuest Stream | Full support1 | Full support1 | Full support1 |
| Go!Link | Full support | Full support | Full support |
| Original LabQuest (DISCONTINUED) | Full support | Full support | Full support |
| LabPro (DISCONTINUED) | Incompatible | Full support | Full support |
COMPATIBILITY NOTES
1.Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
2.A computer with a compatible Bluetooth® 4.0 radio is required. Only computers running Windows 10 or Mac OS X 10.10 or newer are supported.
| Interface | Software Graphical Analysis 4 for Chrome |
|---|---|
| LabQuest Mini | Full support |
| LabQuest 2 | Full support |
| LabQuest Stream | Full support1 |
| Go!Link | Full support |
| Original LabQuest (DISCONTINUED) | Full support |
COMPATIBILITY NOTES
1.Connect LabQuest Stream via USB. Future software updates will support connection via Bluetooth®technology
| Interface | Software | |
|---|---|---|
| Graphical Analysis 4 | Graphical Analysis GW | |
| LabQuest Stream | Full support | Full support |
| LabQuest 2 | Full support1 | Full support1 |
| Go Wireless® Link (DISCONTINUED) | Incompatible | Full support |
COMPATIBILITY NOTES
1.Mobile devices can only connect to LabQuest 2 via Wireless Data Sharing.
Ideal Solutions for Enquiry Based Learning
5 Year Warranty on most items
Award Winning Products
Connectivity with iOS, Mac, Android, Windows and Chromebooks
Guaranteed Quality and Support
Extensive Support Materials
Related Products
Use the Charge Sensor as an electronic electroscope to obtain quantitative measurements when studying charging by induction, friction, or contact.
£103.00 ex VAT | £123.60 Inc VAT Add to basket
The Gas Pressure Sensor can be used to monitor pressure changes in a gas. The range is wide enough to perform Boyle's law yet it is sensitive enough to conduct vapor-pressure or pressure-temperature experiments. Biology teachers can use the Gas Pressure Sensor to monitor transpiration or respiration in an enclosed environment.
£116.00 ex VAT | £139.20 Inc VAT Add to basket
The Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This has many applications in chemistry, biology, and environmental science. The Conductivity Probe has three ranges, providing optimal precision in any given range. Biology teachers can use this probe to demonstrate diffusion of ions through membranes. Chemistry students are able to quickly investigate the difference between ionic and molecular compounds, strong and weak acids, or ionic compounds that yield different ratios of ions. Environmental science students use it to measure TDS, total dissolved solids.
£129.00 ex VAT | £154.80 Inc VAT Add to basket
Our Hand-Grip Heart Rate Monitor is ideal for determining a person's heart rate while mobile or stationary. With this sensor, heart rate can be monitored during, or after, exercise. The sensor consists of wireless hand grips and a receiver module that plugs into any of our data-collection devices. The hand grips sense the electrical signals generated by the heart. For each pulse detected, a signal is transmitted to the receiver module, and the individual's pulse rate is calculated. Do you need an interface? Why not go for our Heart Rate Human Physiology Kit?
£155.00 ex VAT | £186.00 Inc VAT Add to basket
This sensor can be used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample.
£155.00 ex VAT | £186.00 Inc VAT Add to basket
The Vernier Optical DO Probe uses luminescent technology to provide fast, easy, and accurate results, making it a terrific choice for biology, ecology, or environmental science courses. Students can measure dissolved oxygen concentration in surface water or to perform a wide variety of experiments to determine changes in dissolved oxygen levels, one of the primary indicators of the quality of an aquatic environment. Using Plug and play technology, no filling solution is required, no warm up time needed, no stirring and no calibration.
£389.00 ex VAT | £466.80 Inc VAT Add to basket
The Differential Voltage Probe is designed for exploring the basic principles of electricity. Use this probe to measure voltages in low voltage AC and DC circuits.
£51.00 ex VAT | £61.20 Inc VAT Add to basket
The Flow Rate Sensor can be used for environmental or Earth science studies. Flow rate data can be used to calculate the discharge value for a stream or determine the sediment transport of a stream. The Flow Rate Sensor includes 3 riser rods, which enable the impeller to be placed at fixed depths, and is equipped with a 5 m cable so your data-collection equipment can stay on shore. The Flow Rate Sensor also separates into four sections for easy transport and convenient storage.
£168.00 ex VAT | £201.60 Inc VAT Add to basket
The Constant Current System is a DC power source with a built-in current probe designed for use in electrochemistry experiments, and as such eliminates the need for a separate power supply when performing electroplating and electrolysis experiments in Chemistry. It is capable of delivering 0.6 A at 5VDC Use the Constant Current System to explore Faraday's law and determine Avogadro's Number. Note: It can only be used in conjunction with its own built-in power supply. It cannot be used to measure the current of a circuit using a different power supply.
£90.00 ex VAT | £108.00 Inc VAT Add to basket
The Anemometer can be used in a variety of experiments to measure wind speed. Can either be used hand held to measure wind speeds, or used with the accessory rod for static experiments such as in front of wind tunnels. The Vernier Anemometer is an impeller-type anemometer that measures wind speed in the range of 0.5 to 30 m/s (1 to 67 mph).
£116.00 ex VAT | £139.20 Inc VAT Add to basket
The Polarimeter can be used to measure chiral properties of optically active samples without chemically modifying or destroying the sample. This is a vertical polarimeter that uses a 589 nm LED, a fixed polarizer, and a manually rotated polarizer to detect changes in rotation of plane-polarized light in the presence of an optically active compound. Used with Vernier technology, students no longer have to determine the optical maximum with their eye but have a graph that shows a clear change in the light's polarization.
£649.00 ex VAT | £778.80 Inc VAT Add to basket
Our strain-gauge based isometric Hand Dynamometer can be used to measure grip strength, pinch strength, and to perform muscle fatigue studies. Use the hand dynamometer with other sensors (e.g., EKG Sensor) to study muscular health and activity
£144.00 ex VAT | £172.80 Inc VAT Add to basket
The CO2 Gas Sensor measures gaseous carbon dioxide levels in two selectable ranges of 0 to 10,000 ppm and 0 to 100,000 ppm (which covers human breath). Ideal for measuring changes in Carbon Dioxide levels during plant photosynthesis and respiration. You can easily monitor changes in CO2 levels occurring in respiration of organisms as small as crickets or beans! The CO2 Gas Sensor is easily calibrated using a calibration button. A chamber is included for running controlled experiments with small plants and animals. You may also wish to see our O2 Gas Sensor
£350.00 ex VAT | £420.00 Inc VAT Add to basket
This sensor is used to measure voltages in the range of -30 to +30 volts
£64.00 ex VAT | £76.80 Inc VAT Add to basket